FS...3.0 euro engine/ 6 speed

[onelap]

http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=1047275608anyone want a 3.0 euro engine....only 27,000 miles....i start it every week runs great...one of the cleanest ive seen.....ive got lots of goodies to go with it..complete custom ss exhaust with x pipe and v band connections.....also have euro 6 speed tranny with uuc shifter...shaft etc....make offer...you can see and hear the car on my myspace page..email is bmwgtr1995@yahoo.com.......the car is for sale also as a roller or ill sell the whole package complete....


thanks
guys

greg

The Engine is one of the lower milage ive ever seen that why i bought this one. 27,000 miles..... The cleanest ive ever seen. i would like to try to sell the engine package complete if possible.....engine with gt/3.2 intake funnels,CAI,ceramic coated headers, AA software and custom exhaust.( engine should be 320 to 330 hp with mods) harness, oil cooler , overflow, lines hoses included, cluster, You need the cluster .....the engine cost me 6500, intske funnels, $400, ceramic coating $400,
aa software $550, custom ss exhaust with x pipe and all v band connections $2500, custom CAI $300, cluster new $450, over flow and euro engine accy $350+
alum flywheel $500, m3 clutch $300

so i have at least $12,000 invested in these parts.....

I would like to get $6500.00 for all this package.......






Tranny cost me 2500, new uuc shifter 350, urathane mounts 90,would include driveshaft... so ive got about $3000.in this


I would like to get $2000 for the tranny package



The car has hundreds of hours of labor and too many parts to list but ill try.

Started life as a 1993 325is....daily driver. has complete m3 suspension including subframe....all m3 specs some euro m3 stuff.... dove grey vaders, all new door pannels and headliner, diff m3, axels m3 , brakes powder coated calipers m3, the above items approx cost me 4500.00

The custom Simmons wheels were $5000. 18x 12.5 rear 18x10.5 front, pilots all the way around $1600 335/30 and 275/35 respectively. Body kit installed with all new powdercoated fender liners front and rear $11,000. Lightweight wing with risers $700, Genuine euro gt carbon fiber door sills, genuine uero gt 3 spoke wheel,alum pedals, alpine head unit, jl audio subs , custom box, rockford amps, 650 hp fuel pump, billet lockable filler cap, stainless filler tubes, 97 % complete just a few minor parts you need to complete.

I would like to get $10,000 for the roller

about $25,000 i have in the roller.....
about $3000 in the tranny
about $12,00 in the engine

im sure theres lots ive missed there is only more......plus all the hours......to start from scratch you see how fast it hits $40,000.

so for the whole car i would like to get $ 18,500... I am open to offers....i would like to sell it complete and see someone finish it and have a bad ass Wide body...if i dont get any complete offers i will sell the packages listed above

Please go see and listen to the car on my my space page look me up by my email....bmwgtr1995@yahoo.com
thanks

greg

[fsmtnbiker]

How much are you thinking on the engine/transmission combo? Or just the engine alone. If you are to part it, can I assume the engine woudl come with the complete harness/ECU/everything to make it run?

Thanks!

[98///M3]

i like ur exhaust!!!!

[Le Nitro]

its required you post a price

[GodFather]

interested in the 6 speed tranny, PM me with price please!, also that radiator cover, Thank You!

[redefinedM3]

how about selling the full car?... price

[SLH350]

I'm interested in the price for the motor alone.

[BMWManiac]

I'm interested in the 6 speed tranny, drive shaft, and UUC Short shifter/shift linkage. I'd like everything needed to install it, and I believe that is all.

[LextanEuroAuto]

i want the 6 speed as well, how much ???

[LextanEuroAuto]

i call dibs on tranny if u decide to part out the set up

[onelap]

Call me please thanks

[BMWManiac]

Dibs on tranny after lextaneuroauto

[LextanEuroAuto]

where is the phone number ???

[e36mpwr]

interested in 6spd w/ everything to go along. what size diff is in the rear? also possibly interested. now only if everyone else decides to bail!

[BMWManiac]

you suck

[M-crazy]

I will take the full package for $6500. If not sold PM me payment is ready. :)

[onelap]

http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=1047275608

[weaksauce]

I'll trade you my R1 for teh motor and tranny.

[hotshu]

Is the 6 speed already installed in the car? Are all the windows missing? What else is needed to drive this away from your location? Nice setup so far, so why you selling this baby? I'm interested in the whole car, what else is needed to finish the project besides paint?

[LextanEuroAuto]

ok i asked for the number where can i find u info so i can contact u for the tranny ?

[onelap]

ttt

[BMWManiac]

I'd still like the tranny combo for $2k

[jszy25]

I will take the full package for $6500. If not sold PM me payment is ready. :)

Do it Adam!

[farzad97m3]

u got a pm.

[LextanEuroAuto]

yeah sorry i will have to pass on this as i was planing on paying with paypal, and u only take money orders

[onelap]

sorry dont do pay pal had some issues with them that cost me hundreds of dollers.......i shipped parts once and the cust filed for money back for not recieving items..i provided tracking info and everything they needed.....took then so long to resolve they could not get the money out of buyers acct..and did not pay me back..i thought they had insurance for that crap.....i use to sell hundreds of misc turbo parts on ebay......no more.......

[dave330i]

Damn.... really wish you were selling this a month ago. Would have picked up the 6-sp. Can't justify spending $4k on car parts in a single month to the wife. :(

[adriver]

PM sent. I hope we can make this work.

[M3Jokster]

Damn.... really wish you were selling this a month ago. Would have picked up the 6-sp. Can't justify spending $4k on car parts in a single month to the wife. :(


you can do it....i've been doing it for years....send the parts to your workplace!

don't you have a "Mod" Fund acct? i do...

I always wanted a 6spd..went FI instead

[SLEEK.STATIK]

dammmmn

[Arctic///M3]

You should be killed for parting out/selling/not finishing this car

[onelap]

motor and tranny sold!!!@!!!!!


Still have the roller......make ma an offer.........



The car has hundreds of hours of labor and too many parts to list but ill try.

Started life as a 1993 325is....daily driver. has complete m3 suspension including subframe....all m3 specs some euro m3 stuff.... dove grey vaders, all new door pannels and headliner, diff m3, axels m3 , brakes powder coated calipers m3, the above items approx cost me 4500.00

The custom Simmons wheels were $5000. 18x 12.5 rear 18x10.5 front, pilots all the way around $1600 335/30 and 275/35 respectively. Body kit installed with all new powdercoated fender liners front and rear $11,000. Lightweight wing with risers $700, Genuine euro gt carbon fiber door sills, genuine uero gt 3 spoke wheel,alum pedals, alpine head unit, jl audio subs , custom box, rockford amps, 650 hp fuel pump, billet lockable filler cap, stainless filler tubes, 97 % complete just a few minor parts you need to complete.


about $25,000 i have in the roller.....



was asking $10,000

make an offer you might be pleasantly supprised


thanks
guys

greg

[///M3 CRAZY]

i don't need everything, how much for trans, drive shaft and tranny support only? i do not need the shifter or the bushings.

[onelap]

tranny and engine sold already thanks

[///M3 CRAZY]

tranny and engine sold already thanks

thanks. but i could have sworn that post just above mine was not there yesterday. lol i try to skim through to see that sort of thing.

[BMWManiac]

Tranny found a new home.

[2000Z3M]

Tranny found a new home.

I take it you got it

[BMWManiac]

Yes

[BMWManiac]

Greg, sent you a PM....

[ajfox]

Greg, I just sent you a PM.

[Driven3]

Ill take the exhaust if you didnt sell it

[M52 POWER!]

Just curious, why didn't you complete the project? $$ issues? Such a shame... you were so close to an amazing and rare thing! And it sounds like you were doing it legit/non rice style to!

[Antidentite]

wow

[ajfox]

Greg, please check your email, thanks.

[BMWManiac]

Greg, trying to get a hold of you.

[nobrakese36]

Nice wheels, i have a set, i just wish they fit mt car!

[M Dizzle]

is everything sold?

[M3Jokster]

Greg, trying to get a hold of you.


I hope everything is ok......:confused

[Antidentite]

I'm right next to you in New Mexico.

I would trade you this Motocross.com Team race bike for the engine pkg..


I also have a nice 1996 328is Sport/winter pkg. I would love to trade that and the bike for the full car.

Just another Option for you :)

http://img.photobucket.com/albums/v296/GRizzly600/DSCN1608.jpg

[Patrón]

Read the thread, he sold the motor and tranny and only has the chassis left.

[ajfox]

Greg, please check your email & voicemail.

[ajfox]

Greg, I would appreciate a response to my email.

[ajfox]

Greg, I still haven't received your response for my email from a month ago. What's going on?:mad

[ajfox]

Greg, I still haven't received my tracking# yet!!!:mad:mad:mad

[BMWManiac]

PM sent as well....

[Patrón]

:eatpop:

[socerace]

these things werent all sold? or just werent received?

[E36 Shifter]

uh oh anyone get there stuff or a tracking number???

[GG///M3]

This is insane.:nono

[bennyfizzle]

holyshit...

[BMWManiac]

I'm going to put my story out there. Having been around this board for awhile, I'd like to think that I am an honest person and when I've sold stuff, I even offered refunds to unsatisfied members and gotten burned by other members....

A year ago, I paid for a Euro 6 speed tranny w/ driveshaft, tranny brace, and UUC EVO II SSK. After finally getting everything about a month and a half later, I had everything installed by Autolab LLC in Louisville, KY. The owner called me and told me that it has been installed, and that there was an issue because the 6 bolt flange connecting the driveshaft to the diff had seized and that I would need a new one....great....but also that I needed to come test drive the car because he didn't think it was safe and to for me to make the decision after driving it. I drove 45 minutes to the shop and test drove it and found to my disgust that the car was absolutely unsafe to drive. I HAD TO SEARCH FOR EVERY GEAR!!!! I could not properly do a 1-2, 2-3, 4-5 shift because I had to search for the gear. I could find reverse and 6th gears because they were the farthest apart. I always had to make sure I wasn't in reverse when I wanted to be in 1st gear. I returned the car to the shop and told the mechanic to reinstall my 5 speed because it was just not safe to drive as is.....

I contacted Greg about my issue. I spent $1400 to have the tranny installed and removed and my 5 speed reinstalled. I told Greg about the issues and that I wanted my money back for the tranny and HE AGREED to give me a refund minus the shipping costs. I said fine. He told me of his financial issues and I have been patient with him. I kept in contact with him and he has done the same for the most part, but now we are at a year later and I still have his tranny, etc. ready to ship to him, but have not received my money back.

I started a thread on this forum about what the issues could be and two members, both with experience with the euro 6 speed (owning and rebuilding them), told me that I had a Euro SMG tranny, and not a manual....

[Patrón]

I'm going to put my story out there. Having been around this board for awhile, I'd like to think that I am an honest person and when I've sold stuff, I even offered refunds to unsatisfied members and gotten burned by other members....

A year ago, I paid for a Euro 6 speed tranny w/ driveshaft, tranny brace, and UUC EVO II SSK. After finally getting everything about a month and a half later, I had everything installed by Autolab LLC in Louisville, KY. The owner called me and told me that it has been installed, and that there was an issue because the 6 bolt flange connecting the driveshaft to the diff had seized and that I would need a new one....great....but also that I needed to come test drive the car because he didn't think it was safe and to for me to make the decision after driving it. I drove 45 minutes to the shop and test drove it and found to my disgust that the car was absolutely unsafe to drive. I HAD TO SEARCH FOR EVERY GEAR!!!! I could not properly do a 1-2, 2-3, 4-5 shift because I had to search for the gear. I could find reverse and 6th gears because they were the farthest apart. I always had to make sure I wasn't in reverse when I wanted to be in 1st gear. I returned the car to the shop and told the mechanic to reinstall my 5 speed because it was just not safe to drive as is.....

I contacted Greg about my issue. I spent $1400 to have the tranny installed and removed and my 5 speed reinstalled. I told Greg about the issues and that I wanted my money back for the tranny and HE AGREED to give me a refund minus the shipping costs. I said fine. He told me of his financial issues and I have been patient with him. I kept in contact with him and he has done the same for the most part, but now we are at a year later and I still have his tranny, etc. ready to ship to him, but have not received my money back.

I started a thread on this forum about what the issues could be and two members, both with experience with the euro 6 speed (owning and rebuilding them), told me that I had a Euro SMG tranny, and not a manual....

That is a horrible story, I wonder if the seller knew he had an smg. Even if he didn't know, you brought it to his attention and he still hasn't paid you back and if I'm not mistaken he's ignoring another buyer about a refund and payment as well. I'm embarrassed to say he lives near me too.

[madspeed]

SMG trannies are no good for manual shifting.

[hotshu]

Why? Isn't the SMG just a manual transmission with a motorized shifter added?

With an SMG engine, you need not worry about it being revved past redline on a mistaken downshift.

[BMWManiac]

Why? Isn't the SMG just a manual transmission with a motorized shifter added?

With an SMG engine, you need not worry about it being revved past redline on a mistaken downshift.

Apparently not. I can't for the life of me remember the member's name that said he could rebuild it into a manual tranny for me, but he said one of the good things is that this tranny hasn't been "shifted by man" since its an SMG and the tranny should be in better condition than a regular manual. Having said that, I wish I kept all the PMs between the seller and myself.

[ajfox]

That is a horrible story, I wonder if the seller knew he had an smg. Even if he didn't know, you brought it to his attention and he still hasn't paid you back and if I'm not mistaken he's ignoring another buyer about a refund and payment as well. I'm embarrassed to say he lives near me too.

Well guys, here is my side of the story. I bought a euro motor from the Greg along with a custom exhaust about a year ago. After months of constant inquiries about the shipping he finally shipped the motor along with parts of the exhaust & told me that he would ship the rest of the exhaust separately.

After months of waiting & trying to contact him he finally responds stating that he's currently in a very hard financial situation & cannot afford to ship the rest of the exhaust. I understood & out of kindness I sent him the money for the shipping. However, 2 months have gone by with just excuses of how the exhaust is too large to ship, so I told him to cut it & repackage it. He confirmed that he had cut the exhaust on 2/22/08, but I haven't heard back from him since.

Bad thing is that I have a person who has already purchased the exhaust & only has the part that I shipped to him!:mad Greg, confirmed with me that he would ship it out to the buyer before the buyer even payed. But guess what, the guy is still waiting for the rest of the exhaust & has been for the past 2 weeks. Now I’m the one that looks bad.:nono

Right now, all I want is the rest of the exhaust shipped to the person that bought it asap, but it seems that Greg is unwilling to make that happen.
Aaron, if I can get a hold of Greg & tell him to give you the rest of the exhaust can I pay you for the shipping so you can send it out for me?:help

[Patrón]

Well guys, here is my side of the story. I bought a euro motor from the Greg along with a custom exhaust about a year ago. After months of constant inquiries about the shipping he finally shipped the motor along with parts of the exhaust & told me that he would ship the rest of the exhaust separately.

After months of waiting & trying to contact him he finally responds stating that he's currently in a very hard financial situation & cannot afford to ship the rest of the exhaust. I understood & out of kindness I sent him the money for the shipping. However, 2 months have gone by with just excuses of how the exhaust is too large to ship, so I told him to cut it & repackage it. He confirmed that he had cut the exhaust on 2/22/08, but I haven't heard back from him since.

Bad thing is that I have a person who has already purchased the exhaust & only has the part that I shipped to him!:mad Greg, confirmed with me that he would ship it out to the buyer before the buyer even payed. But guess what, the guy is still waiting for the rest of the exhaust & has been for the past 2 weeks. Now I’m the one that looks bad.:nono

Right now, all I want is the rest of the exhaust shipped to the person that bought it asap, but it seems that Greg is unwilling to make that happen.
Aaron, if I can get a hold of Greg & tell him to give you the rest of the exhaust can I pay you for the shipping so you can send it out for me?:help

Yes, I'll go pick it up for you, box it and ship it no problem.