1995 M3 fully built engine, taste full mods 13.5k

[1bad m3]

EDIT---- i installed these parts this weekend
1. new ngk plugs
2. royal purple oil change
3.24# injectors
4.540i hfm
5. jim c chip
6. Brembos that have been platted, slotted and drilled
7. Axiss metal master pads

EDIT------- installed this weekend
1. installed new carbon fiber roundels

BASICS
1995 BMW M3

5 speed manual

Hellrot Red

black vaders inside

miles BODY-123xxx Engine 4x,xxx


This car has been my baby ... as well as my 300zx tt... but im active duty navy and my deployments keep me away from home a lil to soon a lil to often and i want to start investing my money in houses... so im thinkin of selling both of my cars... and just buyin a "beater" jeep for snowboarding... so enough about the reason why im selling it now on to the car its self...


the car has been meticulously maintained ( i have 90% of all records) honestly the car has never gone more than 3k w/o an oil change (with records) keys, owners manuals ect... all the "trouble" areas on the car have been addressed IE.. fan delete, metal thermostat housing ect ect... the engine was rebuilt at about 80k for performance reasons...(i also have paperwork)


The engine about 4x,xxx

JE pistons 11.5:1 (higher compression)
rods and head studs were kept stock
the head was give a stage 3 treatment...
ported polished,
ss valves,
titanium retainers
vanos replaced
water pump replaced w/ metal housing
fan deleted
rear dif rebuild
lsd rebuilt
the supporting mods are as follows actually installed right now
cold air intake, w/ custom fabbed cold ram air w/ heat sheild
turner pulley kit
turner flywheel
turner stage 3 clutch
uuc short shift kit
new shocks w/ h&r sport springs
hamman 18" wheels (need refinished clear coat peeling cost about 100 per wheel) tires have 80-90% tread left
euro tail/side lights
uuc sport pedals
vis carbon fiber hood
ac schnitzer carbon fiber mirrors
ac schnitzer 3 piece rear deck lid
B&B triflow exhaust w/ no cats
x brace
cool willey brake pads
brembo rotors
momo steering wheel
uuc shift knob




http://i78.photobucket.com/albums/j90/joker_20_02/tn_Picsfromdadstrip080.jpg (http://photobucket.com/)


(im sure there is quite a bit im forgeting

THE BAD...

cf hood has 2 small spots where rocks kicked -up fix or replace


pass side rear apron has a spot that needs repainted because someone scraped it w/ something..both of these should cost less than $300

DD car so some rock chips in the front bumper .... VERY CLEAN CAR STILL you cant see them untill you are about a foot away...

i would replace the lower m3 lip... like $70

wheels are flaking the clear coat :shifty
and the tint is bubbling in the rear window


well here are some of the pics.... and a dyno run (dont mind me talking hahaha) and a start up to show off how mean it sounds.... YOU HAVE TO LISTEN

LISTEN TO HOW IT SOUNDS MEAN!!! (CLICK THE CENTER OF THE SCREEN AFTER IT LOADS TO PLAY) if it doesnt work email me and ill send it to you that way

http://i78.photobucket.com/albums/j90/joker_20_02/th_BBsoundclip.jpg (http://s78.photobucket.com/albums/j90/joker_20_02/?action=view&current=BBsoundclip.flv)

the dyno run (dont mind me talking hahaha)


http://i78.photobucket.com/albums/j90/joker_20_02/th_Picsfromdadstrip077.jpg (http://s78.photobucket.com/albums/j90/joker_20_02/?action=view&current=Picsfromdadstrip077.flv)


some pics


http://i78.photobucket.com/albums/j90/joker_20_02/tn_Picsfromdadstrip063.jpg (http://photobucket.com/)


http://i78.photobucket.com/albums/j90/joker_20_02/sig.jpg (http://photobucket.com/)



http://i78.photobucket.com/albums/j90/joker_20_02/2f343972.jpg (http://photobucket.com/)


http://i78.photobucket.com/albums/j90/joker_20_02/0adbe028.jpg (http://photobucket.com/)


http://i78.photobucket.com/albums/j90/joker_20_02/tn_Picsfromdadstrip065.jpg (http://photobucket.com/)

http://i78.photobucket.com/albums/j90/joker_20_02/tn_Picsfromdadstrip070.jpg (http://photobucket.com/)


http://www.streetneeds.com/uploads/auser/frontrolling.jpg


http://www.streetneeds.com/uploads/auser/backrolling.jpg


http://www.streetneeds.com/uploads/auser/inside_.jpg


http://www.streetneeds.com/uploads/auser/frontsitting.jpg


http://www.streetneeds.com/uploads/auser/overbridge.jpg





http://www.streetneeds.com/uploads/auser/engine__.jpg





asking 13.5k as it sits ... its in VERY good condition ask anyone who knows me i baby this car
<!-- / message --><!-- sig -->

[David A]

I might have a buyer.

[sandspeed]

I want your car, but I won't be back from Korea for another 45 days. Booo Air Force and Osan. :(

[1bad m3]

I want your car, but I won't be back from Korea for another 45 days. Booo Air Force and Osan. :(
If u wnat it that bad ... pm me I'm sure we can work something out.... I'm on leave out of state till the 16th of jan so I can't selll it right now anyways

[ZLUJ]

sounds really nice, im jelous

[1bad m3]

Bumpity bump

[snowball]

is the car using stock ecu and injectors?

[1bad m3]

is the car using stock ecu and injectors?

Yes it does.... I had a full cam kit but I'm sellin it off because I can't get what I wanted for the car with it

[timboogeyman]

i think im going to copy this exhaust set up....do you have any more videos?

[1bad m3]

i think im going to copy this exhaust set up....do you have any more videos?
Not right now.... ill get u afew more when I get back home on the 16th :)

[sandspeed]

PM'ed you! :)

[1bad m3]

Sooooo bumpity bump :shifty

Soooo I'm 100% a drunken idiot ..... so I would like to say BUMP

[1bad m3]

Bump bump

[dave12345]

nice car

[1bad m3]

nice car
Thanks :)

[1bad m3]

Yeoooo bump... I'm on my way 2 the airport on my way bacj home :P

[1bad m3]

just got back in town ... car is still for sale and can take more pics now if you are interested

[Tristar]

PM sent.

[///MZG]

very nice car.

[1bad m3]

very nice car.

thank you :)

[///MZG]

if you end up wanting to part anything, ie the mirrors, PM me. :)

[1bad m3]

pm me with an offer on them

[sandspeed]

I thought you had an offer of $14k? Did it fall through?

[1bad m3]

I thought you had an offer of $14k? Did it fall through?


still do... but i would like to sale it to someone here that i know takes care of it .. the offer is from a 19 yo that is going to mess it up or wreck it i know

[1bad m3]

Still for sale a lot of talk no money yet

[autocross97]

nice ass car.

what is that in the drivers foglight, a intake or brake duct?

[1bad m3]

nice ass car.

what is that in the drivers foglight, a intake or brake duct?
Its an intake ( a big improved euro snorkle kit )

[Alpine 318is]

only lost by a few car lengths to a E39 m5 so i can vouch for how fast it is.

[EEEEeeee36]

This car is smokin' hot y'all. Joe was on our drive this weekend through the 'canyons' (mountain pass of sorts) - his car was one of my favorites. Sounds awesome, breaks out tires like they were on ice. Sounds mean as hell, and looks friggin awesome. 13,500 is a steal for a car with a built engine like this, and now that he has the large HMF, new software, and 24# injectors - it probably puts down over 235whp (~= to 280chp).

[1bad m3]

This car is smokin' hot y'all. Joe was on our drive this weekend through the 'canyons' (mountain pass of sorts) - his car was one of my favorites. Sounds awesome, breaks out tires like they were on ice. Sounds mean as hell, and looks friggin awesome. 13,500 is a steal for a car with a built engine like this, and now that he has the large HMF, new software, and 24# injectors - it probably puts down over 235whp (~= to 280chp).


thanks for the compliments guys i appreciate them :) ur making me blush ... ill be getting it dyno'd when i get back from hawaii in 2 weeks so we will see how much rwhp it is puttin down now ... my honest guess is about 240-245 but thats just my butt dyno :shifty

[redline effect]

can anybody tell me how much shipping would run me to nj? (07731)

[1bad m3]

can anybody tell me how much shipping would run me to nj? (07731)

From my past experiences its about 1200 cross country

[turbodefrost]

i want this sooo bad :(

[blk328is]

any chance of parting that spoiler?

[timboogeyman]

bump but still want those exhaust clips if possible.

[enzof355f430]

Hey man,
I was wondering if this is still for sale. I've been watching it for a while now. I noticed you had it on craigslist a few times, and when i first saw it on there i instantly fell in love. I'm still a few weeks away from purchasing (have a few things i have to sell, plus get finances ready) but I'm hoping this turns out to be mine. I cant stop playing the video on the dyno. :) The sound is just incredible!!!! Any who, just curious as to whether you have any of the stock stuff...i.e hood, mirrors, etc? Any other pics you could email to me at enzof355f430@yahoo.com
I know i have some other questions but cant think of them right now...all i can think of is the B E A utiful sound of that M! Anyway hit me back, i should be on line a while, more than likely watching the video over and over with the volume way to loud. Oh well.
Thanks
-Matt

[1bad m3]

bump but still want those exhaust clips if possible.


ya i will get them some one stole my camera on new years so ... im going to have to borrow one before i can get them to ya tho... -Joseph

[1bad m3]

Hey man,
I was wondering if this is still for sale. I've been watching it for a while now. I noticed you had it on craigslist a few times, and when i first saw it on there i instantly fell in love. I'm still a few weeks away from purchasing (have a few things i have to sell, plus get finances ready) but I'm hoping this turns out to be mine. I cant stop playing the video on the dyno. :) The sound is just incredible!!!! Any who, just curious as to whether you have any of the stock stuff...i.e hood, mirrors, etc? Any other pics you could email to me at enzof355f430@yahoo.com
I know i have some other questions but cant think of them right now...all i can think of is the B E A utiful sound of that M! Anyway hit me back, i should be on line a while, more than likely watching the video over and over with the volume way to loud. Oh well.
Thanks
-Matt


the only stock parts i have are the injectors and ecu ... Let me know what pics you want PM style and ill take them as soon as i can and post them up here ...-Joseph

[NicoyaM3]

beautiful car, wish i could buy it :(

[1bad m3]

well after much debate of sale/not saling its up for sale again guys pm to work a deal out ... im going to be deploying again soon... its gonna go up on craigslist/autotrader/newspapers after the first of the month .. would much rather see it go to some one here

[enzof355f430]

Sorry to say, but this is good to hear for me. Could you take those pics i asked you to take a while ago. I know you said your camera was stolen, so just send them to me whenever you can. Here is the message is sent you.
Originally Posted by enzof355f430
The two main points i would like to see are the engine and the interior. Also, in your thread you say there is slight damage to the quarter panel, can i see some pics of that? Plus any other pics you want to post of any part of the car is fine. Thanks
-Matt

Thanks
-Matt

[1bad m3]

i guess cell phone pics will do (they dont turn out bad at all i swear) ill take them tomorrow after work its already dark here sorry :(

[enzof355f430]

lol no problem. How big is the spot on the quarter panel? Is it a dent or just a little paint missing?
Thanks
-Matt

[1bad m3]

lol no problem. How big is the spot on the quarter panel? Is it a dent or just a little paint missing?
Thanks
-Matt

its not on the 1/4 panel its on the rear bumper under the 1/4 and its a scrape in the plastic ... easy bondo/paint fix and very un-noticable unless you are washing or inspecting the car... ill take pics from like 5 ft and right up on it to show ....

[1bad m3]

pics will be up later :)

[1bad m3]

more pics as promised.... sorry but it was raining today

here is the one from about 5 ft... you can see the white spot at the bottom of the rear bumper

http://i78.photobucket.com/albums/j90/joker_20_02/nickfar.jpg


close up

http://i78.photobucket.com/albums/j90/joker_20_02/nick.jpg

the chips in the hood i described

http://i78.photobucket.com/albums/j90/joker_20_02/hood.jpg

the scrape on the lower lip (bottom right)


http://i78.photobucket.com/albums/j90/joker_20_02/front.jpg


the ram air box is out ... when i installed the 3.5 intake, hfm, and injectors i had to remove it till i have time to get a new pipe bent that is 3.5 and the complete intake (up to the throttle body is 3.5)

http://i78.photobucket.com/albums/j90/joker_20_02/e2.jpg

http://i78.photobucket.com/albums/j90/joker_20_02/e3.jpg

http://i78.photobucket.com/albums/j90/joker_20_02/e1.jpg

here is where the box bolts up and makes the seal to the scoop its self

http://i78.photobucket.com/albums/j90/joker_20_02/e4.jpg

[byah]

hey bro im willing to pay full price plus whatever it costs to ship it to cali.... get at me on AIM at: crazywigger42 if u wanna know anything more.... e-mail me at d_rizzo42@yahoo.com and ill get back to you fast... hope to hear from you soon.

-Darren

[1bad m3]

every one who is truely interersted feel free to call me at 760 -977-8133 -Joseph

[1bad m3]

bumpity bump

[1bad m3]

here you go :)

more pics


http://i78.photobucket.com/albums/j90/joker_20_02/in4.jpg

http://i78.photobucket.com/albums/j90/joker_20_02/in3.jpg

http://i78.photobucket.com/albums/j90/joker_20_02/in1.jpg

http://i78.photobucket.com/albums/j90/joker_20_02/im2.jpg

[1bad m3]

bump for the new week :)

[1bad m3]

Bump... bump bump .. Bump it up

[1bad m3]

bumpity bump