WTB e36 power seat plugs

[butterm3]

I just bought a set of powered vaders and need the plugs preferably from the fuse box to power them I have manuals in my car.....

I went to the stealer and they claimed that I would need to purchase a complete harness!!!!!

[Dan Wang]

I believe this is what you are looking for.

Dan

[butterm3]

I think those are the heated seats plugs, I need the power I think they are black.....

but if those are the power how much?

Juan

[Dan Wang]

Juan, heated seat plugs are black.... trust me on this one.... I just spent 6 hours this weekend with the seats all part and I know 100% these are for the power seats. ;)

[Bimmer9938]

where do they disconnect? under the dash? I have em installed in my car , I have Sparco seats now , however I will be removing my seats to get my roll bar out (to paint it) in the month of January . I assume they go all the way upto the the ctr. console , sorry I already sold my switches.

[scottycs]

The plugs are white, and I have a set. Make an offer.

[Dan Wang]

Got your payment Juan, the wires will be sent tomorrow.

Dan

[BimwadM42]

Anybody know where to get the "female" versions without having to cannbalize another part?

[scottycs]

Well I pulled the carpet today, and discovered both wires under there even though I had only power seats. No wiring for my heated seats:)

[butterm3]

Dan,

thanks for a quick transaction......now my 2 dilemas the part numbers you gave me for the pins in the fuse box supposedly cannot be purchased seperatly as per my $tealer and do you know which harness is the driver side and passanger, I know is a little anal of me but I want everything to come out factory

scottycs if you still have your wiring do you think I can purchase the wires from the fuse box into the car as far back as possible.....

thanks
Juan

[Dan Wang]

Butta,

Go to a different dealer. This part can be special ordered at ANY dealer.

Regarding your other issue, there is no specific harness for this project you are taking on. The wires I sent you will plug into the seats. The other end of the wires, you will need to use the part number I gave you and solder them to the wires that are now connected w/ the seats.

Its quite simple, it just takes a long time.

Dan

[butterm3]

I understand that it does not matter which plug I choose on either side, but from the factory I am sure that for ex. the red and yellow wire goes to the driver seat etc....so that is how I want to wire mine, I am going to practically rip out the seats and carpet since I am going to route the wires with the main harness...going to do it over a LONG weekend....

[Bimmer9938]

This is why I hate power things , Good luck !