Aqua W/I where to get nylon water line?

[James Bond]

So I was getting ready to turn the boost activation down on my water line and decided to test it first.

While testing I noticed there was 2 big holes in the line :( I did a quick patch job but want to get a new line. I went down and bought some mechanical boost line (usually used for boost meters) but its just a hair smaller and doesnt fit right. Do I have to order this direct from ERL or? Where can I get some of this line?

Thanks guys

[James Bond]

Would anyone see a problem if I just used the appropriately sized RUBBER vacuum line?

[jon volk]

Its a metric line and Aquamist is the only place ive seen sell it although im sure it CAN be found elsewhere. Just give them a ring and order some new stuff, its not terribly expensive. I wouldnt run rubber lines myself.

[paul e]

I got a load of nylon lines in the correct size to fit aquamist hardware from McMaster...

[James Bond]

I got a load of nylon lines in the correct size to fit aquamist hardware from McMaster...

Wow I didnt even think of McMaster (master is right, they have everything)

Do you happen to know the size?

Thanks Paul E

[Shuasha]

The small stuff is 4mm nylon line, the big stuff is 6mm. McMaster sells it for about 20 cents/foot, Aquamist sells it for $5 for 3 feet.

[paul e]

try this one :

#8365K21

at mcmaster.com. Just put the part number in the mcmaster search box..

[James Bond]

try this one :

#8365K21

at mcmaster.com. Just put the part number in the mcmaster search box..

That was it :buttrock

Thanks much Paul E

8365K21
Metric High-Strength Clear Nylon 6 Tubing 2.7 mm Id, 4 mm Od, .65 mm Wall Thickness
In stock
Quantity Per Ft.
1-99 Ft. $0.28
100 or more 0.20