fog lights and high beams at same time

[E34535i]

im trying to figure it out i wanna be able to have my high beams and my fogs and my low beams working all at the same time,..... how do i do it

[VentoGT]

Not sure, but it is against the law as you would blind the pi$$ out of anyone coming around a corner. With your brights on you don't need the fogs regardless, so it would be splicing into wiring and changing things that don't need to be changed.

[John 540i6]

im pretty sure its just re applying power to the fog light relay. The way it works is a relay cuts off power to the fogs when it gets power from the highbeams. If you jump this relay then the fogs will be able to turn off/on with the stock switch on the dash board but you will still be able to have them on with the high beams. Now you just have to find the relay :D Ive done this on every car ive ever owned and it has worked great.....(just not the 540i)

[E34535i]

alright how much is the relay if i have to buy one. i dont think it would take me long to find the relay cause my bro works on pure bmw's . but can you explain a bit more about jumping the relay, so i find it and put it on the floor and then jump it...cause i aint good at jumping...but seriously how would i go about to jumping it.

[flyeryan]

there was a writeup on how to do this a while back in the E36 section I believe. Try searching there. I know it was somewhere on BF.c

[killcrap]

pretty dam sure there is no fog lamp relay. all the electronics are in the LCM

[Vinny Fins]

Couldn't you just splice the wiring, grounding in a new location and rewiring the hot wire to a constant, then add a new switch in the passenger compartment?