replacing OBC bulbs

[Ridgeway]

So I'm endevoring to do more work myself (& yes I'm starting with replacing bulbs lol).
I'm now onto the OBC. Just wanted to double check before I pull to hard and break something.

There is a hole under the OBC where you can stick a finger in. Do I just pull?
See the pic below, it refering to removing a parcel shelf. Is this the little container/box/cubby below the OBC? If so how is it removed (again w/o breaking something :)). Or am I just misreading the instructions?

ty


http://www.jdbeyer.com/obc1.JPG

[UltimateM]

The OBC box can be removed with your finger through that hole, just stick your finger in it and push the OBC towards you. If shes a virgin then you might have to help by prying a little on the top (I use a soft plastic wedge).
The OBC box will come out without take out the little container/box/cubby below.

[Ridgeway]

ok thanks
I just hate pushing & pulling so much w/o being sure (it is in firmly so I assume it has never been removed before). :)

[BimwadM42]

Don't pry. Stick a credit card into the upper gap while applying upward pressure in the hole and the top will come out. Then stick the card in the bottom gap and release the bottom.

[Bennicus]

The OBC pulls out pretty easy. After you get it out you will see 4 bulbs on the top of it that illuminate the whole OBC. Easy to get too, and easy to replace.

[Ridgeway]

Don't pry. Stick a credit card into the upper gap while applying upward pressure in the hole and the top will come out. Then stick the card in the bottom gap and release the bottom.
that helped a great deal
project complete

ty