WTB: S52 3.2L Short Block (CA)

[ToneCapone]

I'm looking for a S52 3.2L short block (block, pistons, rods, crank). Will consider a long block too if the price is right.

Shoot me a PM or e-mail if you have one or have a line on one.

Thanks guys!

[RJ's325ITS]

I been putting 3 series engines together for quite a while and never seen a short block or a long block. All of them have 6 cyl. and can be bore out to 3.4 no matter the year their head are interchangeable.:confused

Can you explain what is a short block?:confused :confused :confused

[ToneCapone]

Huh? A "short block" is a general term for any engine with a complete bottom end, no head, top end, etc. A "long block" is usually a complete, almost turn key, engine.

They are both general terms for all engines not just the S52.

[Bill]

I have 2 S52's in long block form and a S50 block and crank

give us a call 732.791.2331

[RJ's325ITS]

Huh? A "short block" is a general term for any engine with a complete bottom end, no head, top end, etc. A "long block" is usually a complete, almost turn key, engine.

They are both general terms for all engines not just the S52.


Cool:cool , thanks for the info:) , I just get lost in the translation. I have call a short block a block w/a bottom end, and the long block just a engine or motor.

[m3boost]

I have s52 pistons and rods.

[ToneCapone]

Thanks guys for the replies.

Again I'm looking for the S52 short block if possible, long block ok if you're local or if you're willing to deal :)

[sausrigging]

I have a 142xxx s52 i would sell you. Hows 1500?

[beeze]

I had a tough time finding an s52 crank without a block, so make sure you get one in the deal.

[sausrigging]

Tone, pm replied to

[LextanEuroAuto]

i got a complete car 97 m3 54k miles engine/tranny/suspension/rear end/some interior for $1350 call me 415-297-5850 if u interested

[theruss1an1]

i got a complete car 97 m3 54k miles engine/tranny/suspension/rear end/some interior for $1350 call me 415-297-5850 if u interested

Why so cheap?...

-Serge

[LextanEuroAuto]

i need out of my garage quick. it only needs intake manifold/vanos/fuel rail cover/plastic valve cover/mounts/brackets. i can provide all the parts that are damaged except for vanos, but u should find one for about $200.

[LextanEuroAuto]

i need out of my garage quick. it only needs intake manifold/vanos/fuel rail cover/plastic valve cover/mounts/brackets. i can provide all the parts that are damaged except for vanos, but u should find one for about $200.

[beeze]

wrong thread...sorry