PDA

View Full Version : ABS light came on...



mobil1
01-13-2006, 06:57 PM
Just started the car up to back it out so i could wash it, and the ABS light wont go out. I shut it off and started it back up, and its still on. Repeated, still on (I did this because one time it came on, but then I just shut it off and it went out).

Anyone know what problems can arrise from this? I MUST drive my car tonight.

cosM3os
01-13-2006, 07:27 PM
Probably just a wheel speed sensor. You can drive the car but you won't have ABS or ASC. Only way to tell exactly is to have the dealer scan it (they have a special tool).

mobil1
01-13-2006, 09:26 PM
Probably just a wheel speed sensor. You can drive the car but you won't have ABS or ASC. Only way to tell exactly is to have the dealer scan it (they have a special tool).


Yea, interesting. I searched the forums a little bit, and most posts involved the ASC and ABS together, which at the time didnt apply to me since only the ABS light wouldnt go out. Then I drove around, turned off my traction control, then attempted to turn it back on and it wouldnt.

So I reach my destination, and after I had parked it for about 3 minutes, I got back in and started it up, and both lights turned off and the car ran fine. Traction control turns on and off normally.

Wtf mate?

mobil1
01-14-2006, 07:56 PM
Bump.

Anyone know what caused this? I've driven the car on and off for a day now without return of the lights. Just fluke? Or maybe a bad relay switch or something along those lines?