UUC underdrive pulley installation

[GUINNESS]

Does anyone have DIY documentation for this? I searched around on here and using google and couldn't find anything. All I have right now is this


All can be accessed for above. Remove the radiator cover. Release belt, change pulleys.

Easy.
tools: screwdriver Phillips
socket 17mm, 10, 12, 13, 14mm
Breaker bar

That's great and all, but it doesn't exactly say how it's all done. No, I don't have a Bently Manual either.

Any help would be appreciated.

[djfmf]

it's a pretty simple swap just to let you know, much easier if you did the fan delete mod. where each pulley goes is simple because one pulley has 3 bolts while the other one has 4 bolts. just follow the waterpump write-up, don't remove the waterpump of course, just in case you still have the fan on just take that off and replace the pulley with the 4 bolt pulley
http://www.understeer.com/waterpump.shtml

[GUINNESS]

just follow the waterpump write-up, don't remove the waterpump of course, just in case you still have the fan on just take that off and replace the pulley with the 4 bolt pulley

Where might that write-up be :ponder Thought I saw it before, but can't remember where.

[Griz]

by way of E36 DIY Links (http://www.geocities.com/e36rulz/DIY.html)

pulley install: link (http://www.geocities.com/e36rulz/EvosportPulleyInstall.html)

[GUINNESS]

Awesome, thanks guys!