e36 Rieger Drama PT.2/Also need help!

[kevincao]

ANYONE KNOW WHERE I CAN GET THE MATCHING MESH FOR THE BUMPER OR ONE VERY CLOSE TO RIEGER?

Okay after waiting 5 months for my bumper rieger bumpers to come in, they are finally installed AUG 30 ish..YES:buttrock

http://img344.imageshack.us/img344/4474/img70267yj.jpg
http://img344.imageshack.us/img344/1719/img70278cq.jpg

THEN


SEPT 3-5 Tropical Storm + driving home from school
-Front bumper was poorly mounted cause bodyshop couldn't read german instructions and bumper fell off then rolled under my car cracking in 5+ places
http://img344.imageshack.us/img344/7690/dscn48283ng.jpg
can't really see the cracks but the lip on the driver side in hanging, both sides are cracked and many other parts...losed rieger!!! brake ducts and grill:mad
http://img344.imageshack.us/img344/5094/dscn48302mj.jpg

OCT 1-5

NOTE:its Authentic Rieger bumper made of ABS and the bumper had to be sent out to a special shop that that repair ABS

Car FINALLY comes back with the cost covered by the bodyshop for repairs and now I need a Grill, foglight kit, oxgen senors and a bunch of little front end parts OOO and i installed some OE m3 side mirrors thanks to the Group buy.

http://img344.imageshack.us/img344/3811/img75037rr.jpg
quilk pic, very ugly but it looks good for the exception of the grill and fog lights...still looks like the first pic but with m3 mirrors(I gotta learn how to take night time pics good)

SO ANYONE KNOW WHERE I CAN GET THE MATCHING MESH FOR THE BUMPER OR ONE VERY CLOSE

[///M LIFE©]

Nice story. What suspension you running

[kevincao]

Nice story. What suspension you running

running H&R sports with Bilstern sports

[eurotekm3]

U can get a wide blacked out grille on ebay, Im also selling a pair of brand new crystal clear foglights $75 shiped.:)

[T-Rex]

car looks great, nice to know I have an east coast counterpart :D

[chamber36]

awesome body kit, i love the sad picture of you crying hahaha

[The-Great-328ic]

Did you pose for that pic, or were you really crying?

Anyway, I would suggest wire mesh from Homedepot, cut it, paint it black and install it a $20 job
good luck

[one]

I dunno where you can get the mesh and stuff, but grab a can of satin black finish aerosol and climb under there and spray everything. Ducts and all.

[Matt P.]

rieger bumpers are so hot

[kevincao]

Did you pose for that pic, or were you really crying?

Anyway, I would suggest wire mesh from Homedepot, cut it, paint it black and install it a $20 job
good luck

lol nah my friend was taking pics of the damage and i was wiping my face off cuz i had to jack up my car and pull my bumper out and under my car...the rain water was up to the door edge...I WAS SOAKED

[Frederick]

lol nah my friend was taking pics of the damage and i was wiping my face off cuz i had to jack up my car and pull my bumper out and under my car...the rain water was up to the door edge...I WAS SOAKED

Sorry to hear about your problem. Have you tried contacting some UK reiger suppliers? I think they should have the mesh in stock.

PS You kinda look PWN3D in this photo..


http://img344.imageshack.us/img344/7690/dscn48283ng.jpg

http://img.photobucket.com/albums/v387/b1mmer/fredowned.jpg

[kosta]

i have some mesh you may be able to use but it has a hex design

[bennyfizzle]

http://img.photobucket.com/albums/v225/bennyfizzle/pwnt.jpg

[ACS320i]

LOL
damn that sucks to hear

your car is sick

[ACS320i]

LOL
damn that sucks to hear

your car is sick

[kevincao]

i have some mesh you may be able to use but it has a hex design

i gotta talk to to you, home depot is not the place lol i tried already the mesh in 2 big, rieger uses small hex pattern

[iCeDmAn]

i hope you didnt get raped on repairs, b/c there arent abs repair specialists any body shop would repair it just the same...

sorry to hear that bro, I kno how it is with these rieger bumpers i suggest you get an oem m3 if this one breaks again

[kevincao]

i hope you didnt get raped on repairs, b/c there arent abs repair specialists any body shop would repair it just the same...

sorry to hear that bro, I kno how it is with these rieger bumpers i suggest you get an oem m3 if this one breaks again

yea..problem was that it was poorly mounted cause they didnt understand the german instructions lol but they had to sent it out to a specialists to work on the ABS and it took like 3-4 weeks to get it back from the guy

[byron]

nice car. too bad about the bumper:(

[nismo skyline]

try contacting don at modbargains. i know they carry rieger. i got my kit from MMS and i know the mesh can be hard to match.

[Mad Dog 20/20]

I kno how it is with these rieger bumpers i suggest you get an oem m3 if this one breaks again

Yah. Having had it on my car, I can honestly say "Rieger = junk".

[Bimmer325]

you may have been wiping your face, but i would have been crying, and not caring what ppl thought!:bawl

[kosta]

i gotta talk to to you, home depot is not the place lol i tried already the mesh in 2 big, rieger uses small hex pattern

haha i didnt get the mesh from home depot
i got it online from a mesh supplier
it looks similar to the rear of a lamborghini murcielago
its a 6 sided shape

[OneHipNip]

Just buy an OEM M3 Mesh. I bought mine from Pelicanparts and it fits snug on my Rieger Front.

[kevincao]

Just buy an OEM M3 Mesh. I bought mine from Pelicanparts and it fits snug on my Rieger Front.

can i get the name/model# or a link?

[Eric BMW]

awesome body kit, i love the sad picture of you crying hahaha

+1