PDA

View Full Version : All this to replace a brake booster...


I3uller
11-03-2005, 08:19 PM
:mad

<IMG src="http://img.photobucket.com/albums/v437/I3uller/goddamnbrakebooster.jpg">
Daved
11-03-2005, 11:17 PM
:shifty
dunski
11-04-2005, 12:14 AM
:mad
<IMG src="http://img.photobucket.com/albums/v437/I3uller/goddamnbrakebooster.jpg">
who needs brakes.
I3uller
11-04-2005, 01:46 AM
who needs brakes.

Well some prefer the brake delete mod but I like to keep them as a precaution.
northeaste36
11-04-2005, 01:57 AM
Maybe you should invest in a Bentlay manual...or is this the correct procedure?
erik325i
11-04-2005, 02:11 AM
Maybe you should invest in a Bentlay manual...or is this the correct procedure?
Just so you know, that guy has an m50 motor in his e30. I don't think the Bentley would help at all...
northeaste36
11-04-2005, 02:31 AM
damn, maybe he needs both books!
I3uller
11-04-2005, 03:32 AM
Yea I wouldn't have had to take the whole damn intake manifold off if the booster wasn't as big as it is. I missed it by about a half an inch. So close to being less than half the work...but so far. :( :mad Seriously though isn't that picture the most complicated mess you have ever seen? Tommorow I gotta start puttin it all back together....
northeaste36
11-04-2005, 05:16 AM
Yea I wouldn't have had to take the whole damn intake manifold off if the booster wasn't as big as it is. I missed it by about a half an inch. So close to being less than half the work...but so far. :( :mad Seriously though isn't that picture the most complicated mess you have ever seen? Tommorow I gotta start puttin it all back together....

looks just like my car did.
I3uller
11-04-2005, 05:20 AM
looks just like my car did.

Enough to make you wanna huck a molotov cocktail in there isn't it?
symptic
11-04-2005, 06:57 AM
screw brakes. just prepare to stop rolling miles before
builder
11-04-2005, 11:13 AM
Get an anchor
erik325i
11-04-2005, 11:17 AM
:( :mad Seriously though isn't that picture the most complicated mess you have ever seen? Tommorow I gotta start puttin it all back together....
Come on. It's just an intake manifold. It's not too hard.
FredK
11-04-2005, 02:49 PM
Just use the e-brake. J/k!
I3uller
11-04-2005, 02:53 PM
Come on. It's just an intake manifold. It's not too hard.

There is so much crap on the m50 manifold...it's retarded. You are welcome to do it for me if you'd like. ;)
FredK
11-04-2005, 03:01 PM
Yeah, there is a lot of crap on the M50 manifold. I'm finishing up an M50 install on my car this weekend. It's a pain, but at least you're not under the car wrestling with something that weighs 100lbs, or rusted solid. Also, there aren't that many fasteners.
Ghery
11-04-2005, 05:03 PM
Ryan, get back to work chap.
I3uller
11-04-2005, 07:30 PM
Ryan, get back to work chap.

I have been. Booster and master cylinder is all back together and bolted up. Just need to re attach the intake manifold and I'm all good to go....or I hope so. I just really hope that this booster works.