PDA

View Full Version : Feeler: Pcoated Black Double Spoke Is SoCal


RedV
09-11-2005, 11:18 PM
Considering selling my wheels in favor of buying some LTWs through work, I love em, but change is good too. I'm looking to get 400 OBO for them. 3 have bends in the lip, but still hold air perfectly. Tires are Kumho Esta Supras in 235/40/17 and the rears are at the wearbars and fronts have a few thousand left in them. The wheels have NO curbage on them, finish is still glossy but do have minor pitting and scraches from being washed. There is also a spot about an inch or so around on one wheel that was touched up by the previous owner, but is not noticible. From more than 3 feet away they look great! Here are some pics of them on my car.

<IMG SRC="http://e36geoff.com/mye36/IMG_5814.jpg">
<IMG SRC="http://e36geoff.com/mye36/after.jpg">
sexy325
09-11-2005, 11:31 PM
tempting....

can u post close-up pics? it looks way too flawless from this angle.. :D
TheTransporter
09-12-2005, 02:11 PM
are u willing to ship if purchased out of state?
RedV
09-12-2005, 10:28 PM
I will ship if shipping is payed for, and it will be pricey. I would most likely need to dismount the tires to keep the shipping somewhat reasonable. ARound 40-50 bucks a wheel iirc. And i'll see if I can't snap some pics of each wheel toinght.
hakstern
09-13-2005, 01:33 AM
are the bends fixable?
RedV
09-13-2005, 01:41 AM
yes, and they still hold air and will not cause vibration when properely balanced. If I keep them, I am going to be straightening them and getting a pair of new tires. However, I'd rather sell them cheap and try and put the 1700 bucks together to get ltws from work.
TheTransporter
09-13-2005, 02:13 PM
can you please look into the shipping? I don't think you'll have to dismount the wheels. I've ordered complete wheels before and normally they're shipped with cardboard covering the top and bottom faces of the wheels. Should be about a hundred total here to oregon.
RedV
09-13-2005, 04:42 PM
can you please look into the shipping? I don't think you'll have to dismount the wheels. I've ordered complete wheels before and normally they're shipped with cardboard covering the top and bottom faces of the wheels. Should be about a hundred total here to oregon.

I dunno what carrier was used to ship them, but I dunno who ships four 50lb packages for 100 bucks. But I'll be more than happy to check into it.
hakstern
09-13-2005, 10:48 PM
how much would it cost to fix the bends on the 3 lips?
The-Great-328ic
09-14-2005, 12:22 AM
it shouldn't cost much to send them to Oregon, I sent 4 17" wheels/tires to Texas, it was only $76 bucks through Fedex Ground, now if you're sending them to the east coast, add $50 bucks to the price.

p.s. you don't need boxes to ship them, just cut a piece of cardboard around the rims so they won't damage the paint and wrap them with filament tape
D_ALPINE_M
09-14-2005, 01:58 PM
Yeah I agree I sent a set of 15's a while back for only 30 down to southern cali a few year back.
RedV
10-03-2005, 04:57 PM
They are officially for sale... so if you're interested, pm or post
inlinesixm3
10-03-2005, 07:54 PM
ill takem' you have mail
JETninja
10-04-2005, 02:24 PM
Just wondering how the powdercoat has held up? Mine are just painted and looks like crap up close. (from prev owner) Would PC is its durable and the cost aint tooo much....

If yours were staggered I'd be interested, want a second set for my "R's"....
RedV
10-04-2005, 10:02 PM
Just wondering how the powdercoat has held up? Mine are just painted and looks like crap up close. (from prev owner) Would PC is its durable and the cost aint tooo much....

If yours were staggered I'd be interested, want a second set for my "R's"....

Why would you want a staggered setup on R comps? And the finish has held up great, I just clay them once and a while and treat them basically like car paint.
fliplap
10-04-2005, 10:14 PM
Yeah, it shouldn't cost much to ship them at all. I just had a set of wheels and tires shipped from Fremont, CA to Phoenix, AZ for $75 via FedEx Ground
ELIBEEMER
10-05-2005, 12:04 PM
You Got Mail.
JETninja
10-05-2005, 12:07 PM
Why would you want a staggered setup on R comps? And the finish has held up great, I just clay them once and a while and treat them basically like car paint.

Cause I like the look with my car with DSII's in Black, and need to get the "R's" off my car and save them for track use. I bought it this way, I do 70m a day commute. Good thing the suspension is setup so well the "R's" are wearing great.....

So I hope to do a set of street wheels, and track wheels in the near future....

Capish?
RedV
10-05-2005, 10:39 PM
I believe I responded to eveyone's pm, if i missed you, pm me back.
djfmf
10-06-2005, 09:56 AM
hey i'm from san diego and am interested in your rims. still deciding if it'll look good on my cosmo schwarz m3 though because i have chrome M contours and i think black cars look good with the right type of chrome wheels (especially chrome LTW rims). would like better pictures or meet up this afternoon to look at the rims. i live in the Mira Mesa area.
ELIBEEMER
10-06-2005, 01:07 PM
Sold !!!
Kaiv
10-06-2005, 03:51 PM
Sold !!!
`


Crap ! I wasn't fast enough :embarrasm
RedV
10-07-2005, 12:30 AM
Sold !!!

Not only do you decide to crap my thread by claiming them sold, then you pm me with an offer less than my asking price.

They have been sold to another forum member. thanks.
dasminkar
10-31-2005, 12:28 AM
needs a polished lip on them rims, for real dawg!