Here's a rear suspension problem you haven't seen...

[johnpiero]

Sold

[1lo///m3]

Here's the problem: The right-rear tire is about 1/4" from the outer fender while the left-rear is about 3/8" from the fender.
When looking at the car from the rear, it's obvious that the passenger side rear wheel is pushed in more that the driver side.

What could the problem be and how do I fix?

BTW I'm running on 255's.

Ideas:
1. Can an alignment fix the problem by pushing the wheel in or out?
2. Could my rear suspension mounts be worn?
3. Could my frame/suspension be torqued?

Thanks for the help.

unless its been wrecked id say just an alignment should fix it. jack the car up and push the wheel in and out see if anything gives at all.