PDA

View Full Version : WTB: Pass Rear Lower Control ARM (link, not bushings)


gielamonster
02-03-2005, 10:59 AM
I need one of these (minus the Turner Motorsports reinforcement plate welded on... thats just where I could find the picture).

http://www.turnermotorsport.com/image/suspension/susp_e36_rearcamber_rein_installed.jpg

My car is a 1993 325i 4-door.

How's $35 shipped to 48067 sound?

I'm also due for new LCABs up front and RTABs out back, so if you bought some but figured out you aren't going to use them, sell them to me before I buy new ones.
gielamonster
02-04-2005, 12:29 PM
Bump. Anyone parting out a car? This should take all of about 5 minutes to remove. I can send you my bent one if you need to leave the rear suspension in working condition.

I've been driving on mine since I bought the car, just noticed it was bent as I was swapping in the rear M3 swaybar. So its fine for driving, I'm just not comfortable pushing on the car with it bent.
gielamonster
02-05-2005, 08:37 PM
Anyone?
funkmasta
02-05-2005, 10:30 PM
Hey man, if you still need one in a couple weeks let me know...
gielamonster
02-06-2005, 09:33 PM
Ok Joe, will do. Thanks.
gielamonster
02-20-2005, 07:50 AM
Joe, I found another guy that had one, he's sending it to me already.

If you still want my remote starter system, bid on it on ebay. Its still at the opening (lowered) price, way less than half of what it cost new.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5752233526