Toggling Preset Stations w/Steering Wheel

[aok2me]

I can't seem to toggle through my preset stations with my steering wheel buttons. It just goes through all the stations or strongest stations depending on whether I have the station scan settings on manual or not. It does this on FM1, FM2 and FMA. I looked at similar postings like this, but no solutions posted, such as keep it on manual or FMA, worked. What the heck is FMA anyways?

[The Beastmaster]

How's the response from the cd changer? Is your MID working ok for the radio and cd settings? Does your OBC work properly? If you cannot access the cd changer at times and the MID works for the OBC and not for the radio, it could be your head unit.

[aok2me]

How's the response from the cd changer? Is your MID working ok for the radio and cd settings? Does your OBC work properly? If you cannot access the cd changer at times and the MID works for the OBC and not for the radio, it could be your head unit.
Well, it works fine on CD. I can skip track and fast forward. OBC seems fine. I'm not sure how you can tell if it isn't. What do you mean by MID?

[The Beastmaster]

The MID is the display that most people would consider the radio.

I had probs with my display as the OBC functions would all work fine, but the display would go blank on the radio settings. Sometimes the display would come back right away, other times I'd have to turn off the engine and restart. It turns out the ac vent condensation shorted out my radio.

[aok2me]

The MID is the display that most people would consider the radio.
The display works fine too. I wonder what else it can be.

[aok2me]

Fixed. While in fm/am mode, press and hold <SELECT> for approx. 5 seconds. Repeat to toggle on/off.

[aok2me]

Fixed. While in fm/am mode, press and hold [SELECT] for approx. 5 seconds. Repeat to toggle on/off.