checking out some ebay wheels, will these fit a 95' M3?

[E36M3wantedinNY]

here is the link:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7924432980

for the lazy,
this is the essential info:
Wheel Size: 18X8.5 ET38 And 18x9.5 ET35
Multi Piece Look, Deep dish 2" and 3"

I'm wondering if those rears will fit. :b_hot

[ayton]

9.5 rears is a tough bet on an e36 the rears will definately have to be rolled and you need a high offset ...maybe 44-47mm

side note
the disks work out OK for you?
That DAMN possum knocked over my garbage can and pilfered the contents what a mess! :nono

[E36M3wantedinNY]

9.5 rears is a tough bet on an e36 the rears will definately have to be rolled and you need a high offset ...maybe 44-47mm

side note
the disks work out OK for you?
That DAMN possum knocked over my garbage can and pilfered the contents what a mess! :nono

yup yup, thanks. the possum was a cute little bastard, but we prolly should have caught him and thrown him down a sewer drain. :D

now i have to figure out what to do about the rear strut towers. i'm looking up options right now. i figure i might as well lookup aftermarket options, as well as oem factory options. I'll be swinging by the stealership to see who they refer me to. i'm also looking for pics of what it's supposed to look like, what the new parts that should be welded look like, and what exactly the rsm problem is, cause i don't really understand it.

[ayton]

check these out and you will understand

http://www.tcdesignfab.com/E36%20Rear%20Shock%20Tower.htm

http://bimmerforums.com/forum/showthread.php?t=230349&highlight=rear+shock+tower


http://bimmerforums.com/forum/showthread.php?t=224845&highlight=rear+shock+tower



:) :)