Trea b
08-01-2024, 01:55 AM
So I thought I could save this 93 525i 5 sp. I brought this car home. It's not in bad shape. But it had milky oil!!!! And the intake was in the trunk. So I tore into it as we do
Removed the cyl head had it rebuild put it all back together as the book says. But I got crank but no start! So yes set the timing with the vanis tool. All these are new. Fuel pump, fuel filter, cam position sensor, new injectors, I have spark. Checked each injector with noid light it pulses. Sprayed starting fluid in the intake. It started and ran for 10/15 seconds. Then died. Then just cranks??? So what could be the problem or where should I go next?? Also new plugs!
Removed the cyl head had it rebuild put it all back together as the book says. But I got crank but no start! So yes set the timing with the vanis tool. All these are new. Fuel pump, fuel filter, cam position sensor, new injectors, I have spark. Checked each injector with noid light it pulses. Sprayed starting fluid in the intake. It started and ran for 10/15 seconds. Then died. Then just cranks??? So what could be the problem or where should I go next?? Also new plugs!