PDA

View Full Version : Suspension/wheel question



300kplus
06-21-2024, 01:58 PM
Has anybody been able to run 18 inch style 32s on an E39 M62
Square setup WITHOUT COILOVERS?

No fudging with suspension just slap them on and go (1998 M62

TIA!


Sent from my iPhone using Tapatalk

BimmrMeUpSnotty
06-21-2024, 02:36 PM
8 inch or 9 inch? If the wider ones, you will need either a 12 or 15mm spacer up front.

300kplus
06-21-2024, 02:41 PM
8 inch or 9 inch? If the wider ones, you will need either a 12 or 15mm spacer up front.

The 9 inch. Going to be using extended Lugnuts for the rear with 12.5 mm spacer

Are you saying I don’t need for the rear but only for the front?


Sent from my iPhone using Tapatalk

theWalkinator
06-21-2024, 05:41 PM
I had 18" wheels from E38 on before, 8.5" front, 9" rear, front is fine but the rear would rub the outer wheel arch when car hit pot holes or on rough roads, need to roll the fender.

BimmrMeUpSnotty
06-21-2024, 06:41 PM
The 9 inch. Going to be using extended Lugnuts for the rear with 12.5 mm spacer

Are you saying I don’t need for the rear but only for the front?


Sent from my iPhone using Tapatalk
Without the spacer on the rear, you may rub with 275/35/18 on the fender, better to go with 265/35/18 back there. The fronts, without a 12-15mm spacer, the rim or tire will rub on the strut, 265/35/18.