NOFATCHX1337
04-17-2024, 02:29 PM
Heyyy there people! So , I have a tuned e34 touring version with chip/egr-off/big IC/kit4p kit and I'll be honest the car runs amazing. But , now, today I wanted to play a little with the boost. I installed the gauge and controller , nothing complicated , runs happily at 1.5bar and I have no wishes to risk playing with increasing it more , so after 'benchmarking' the settings and happily returning to garage I decided to remove the trail of gauge (want the interior stock) and call it a day , but in the engine compartment right side noticed that the engine mount is getting 'squishy' and it's showing a subtle oily environment,tried to swing softly the engine by intake and there definitely is free play...
So, not a whole year has run around and this is second replacement first from BMW OE was FEBI and now the MEYLE did not manage the job. I tried looking up 'PU' engine mounts but best you can get come only for 525i . Are there any alternatives ,like maybe it's a possiblity to fit mounts from e39 530d ?
So, not a whole year has run around and this is second replacement first from BMW OE was FEBI and now the MEYLE did not manage the job. I tried looking up 'PU' engine mounts but best you can get come only for 525i . Are there any alternatives ,like maybe it's a possiblity to fit mounts from e39 530d ?