View Full Version : E36 m3 quarter glass seal #?
AceFrmSpace
08-09-2023, 06:58 PM
Hello
Don’t want to bother y’all with things like this , once again cannot find a part number. Looked at bodywork>left door on realOEM and Trim, neither has this part. Perhaps I am just bad at using this website
If someone could give me a # , I’d appreciate this a lot
Here is the picture of the missing part I need:
https://imgur.com/a/5VZWpDJ
bluptgm3
08-09-2023, 07:13 PM
Hello
Don’t want to bother y’all with things like this , once again cannot find a part number. Looked at bodywork>left door on realOEM and Trim, neither has this part. Perhaps I am just bad at using this website
If someone could give me a # , I’d appreciate this a lot
Here is the picture of the missing part I need:
https://imgur.com/a/5VZWpDJ
Could be #10 (https://www.realoem.com/bmw/enUS/showparts?id=BF93-USA-06-1995-E36-BMW-M3&diagId=51_2060)
51368151085 Covering left
51368151086 Covering right
LuvMy328is
08-09-2023, 07:24 PM
Could be #10 (https://www.realoem.com/bmw/enUS/showparts?id=BF93-USA-06-1995-E36-BMW-M3&diagId=51_2060)
51368151085 Covering left
51368151086 Covering rightI would agree
Sent from my Pixel 4 using Tapatalk
AceFrmSpace
08-09-2023, 11:16 PM
Hope y’all are correct. I have a coupe by the way, not a sedan. Wonder if this’ll fit
Edit: Yes, this is the correct part. Thank you. I appreciate this lots
1995318is
08-10-2023, 01:41 AM
If there's a circle connector in the engine bay beside the fuse box it's ODB1. Legal requirement was enstated in 1996 in NTSC region. I have a 1995 318iS and had to do the stomp test as there's no OBDII port.
Powered by vBulletin® Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.