lolofett
06-29-2023, 02:24 PM
Hi all
No this is not the bushing for reverse and 5th. it’s actually one of the smaller bushings for 1234. I was replacing those detents when after pulling the cap off, i found out one of the detents was replaced. Unfortunately the bushing for that detent was damaged due to the screw i used to pull the cap off so i had no choice but to remove it. I deformed the bushing but it’s still stuck in the transmission. Any tips? I don’t wanna buy a new transmission
I’m about to try a torch and some locking pliers to pull it out
https://drive.google.com/file/d/1lnc3of-Lm7wkr5612UO_EY-vBx00hmXN/view?usp=drivesdk
*will update with more pics
No this is not the bushing for reverse and 5th. it’s actually one of the smaller bushings for 1234. I was replacing those detents when after pulling the cap off, i found out one of the detents was replaced. Unfortunately the bushing for that detent was damaged due to the screw i used to pull the cap off so i had no choice but to remove it. I deformed the bushing but it’s still stuck in the transmission. Any tips? I don’t wanna buy a new transmission
I’m about to try a torch and some locking pliers to pull it out
https://drive.google.com/file/d/1lnc3of-Lm7wkr5612UO_EY-vBx00hmXN/view?usp=drivesdk
*will update with more pics