PDA

View Full Version : E36 heater control valve coolant hose help!!



onesikM
07-31-2022, 02:53 PM
Hey guys I知 having trouble finding this hose that goes to the firewall on my 95 m3. Basically in need to refresh all the rear coolant hoses toward the driver side rear of the engine leading into the firewall. I知 looking for part number 64218391240 which is a short rubber hose, however when you punch that part number in that I retrieved from realoem something does not add up because that number comes back with a totally different looking hose that is part metal and part rubber. I知 certain that the the part number shown in this diagram is incorrect. If someone has the correct part number that would be a great help!

So far I have these hoses and i just need the last one im having trouble finding. I知 going to try and attach this photo and hopefully it works since I have very few posts but here goes! This is the image from realoem.com by vin number

So far I have these parts
-64211394292
-64211394293
-11531738053
https://uploads.tapatalk-cdn.com/20220731/c00ec8fc08a6503be5404f0bc3bb3bb6.jpg


Sent from my iPhone using Tapatalk

Eric93se
07-31-2022, 03:45 PM
It looks like it might be an error on realoems part. The diagram above is the same for the m52, so you can use the part number from an m52. 64211394291
https://www.realoem.com/bmw/enUS/showparts?id=CD43-USA-10-1996-E36-BMW-328i&diagId=64_0126

samy01
08-05-2022, 12:23 AM
consider replacing 11 53 1 703 844, too. return hose from heater valve to metal pipe. (part number is for m52, check if it fits your car)

onesikM
09-13-2022, 02:52 PM
Thanks for your responses guys! I figured it out my local dealer was able to pull up the correct parts. There must have been mix up of numbers on realoem


Sent from my iPhone using Tapatalk