BMWtyro
02-26-2022, 07:05 PM
My '87 325's horn switch has failed due to a "rotten" tiny circular retainer that held the spring and graphite contact in place; the connector protruded from it. I decided to try to replace that retainer with PC-7 Epoxy, but now the contact and its spring are nowhere to be found.
Does anyone have either a good used switch or at least the contact/spring/connector component of it on which I could try my epoxy idea? The new part by this number has been discontinued(!) and I can't find one anyplace. The BMW P/N is 32331350750. See image below.
https://i.ebayimg.com/images/g/RTkAAOSw68lanOum/s-l1600.jpg
Does anyone have either a good used switch or at least the contact/spring/connector component of it on which I could try my epoxy idea? The new part by this number has been discontinued(!) and I can't find one anyplace. The BMW P/N is 32331350750. See image below.
https://i.ebayimg.com/images/g/RTkAAOSw68lanOum/s-l1600.jpg