WTB e36 clutch/brake pedal assembly

[cmybimmer]

Looking for a full brake/clutch pedal assembly for my 95 325i. It’s the last piece for my 5-spd swap. I’m more interested in the whole assembly as one piece, not just the pedals.

If you have one laying around, please let me know. Thanks

[M Dizzle]

https://www.bimmerforums.com/forum/showthread.php?2458326-BMW-E36-M3-Manual-pedal-box-and-reservoir-for-manual-swap&p=30762977#post30762977

[nvmye36]

I have a few extras, depending upon which year clutch pipe you have, if you have one.... depends on which clutch master cylinder you need. There are three different variations. One screw in and to two plug in types of clutch masters. One of the pipe styles is no longer manufactured.

699243699244
This is the one no longer available as parts. The pipe at least.

[nvmye36]

699245
Next to stye still available. Notice the shoulder difference.

[cmybimmer]

Thanks everyone for getting back, I found a set at the local pick n pull.

Can someone help me however of the compatibility for these things. I bought an assembly from a 328i that had the plug-in cylinder like the above pictured, but I already had the thread-in type master/slave cylinders from another part out. When I tried to use the same mounting hardware of the 328i master cylinder, it didnt work with the thread type master because the master body kinda bulges out a little. If I do not care about running a clutch sensor, do I even need to run those brackets?

Thanks,