Replacing MAF connector

[scubajim20]

Just putting some projects together. Is there a source or p/n for the connector attaching to the MAF? I have broken both of the releases and even though it seem snug, it annoys me. I wanted to repin a new connector rather than replace the entire harness.

[JimLev]

I replaced both the connector and pins when I did the throttle body connector and pins. I’ll get the p/n’s later this morning, need coffee first.

[BimmrMeUpSnotty]

It’s all in realoem, electrical section. Just gotta know what you are looking for.

[scubajim20]

Thank you Sirs

[300kplus]

Just a little tidbit. My M62 was running rough. MAF needed replaced. There's a rubber O ring that'll eventually crack on the throttle body end of the MAF and give you headaches. Mine was cracked and the crack was underneath where I couldn't see it at first...
Just a heads up for the future...

Sent from my SM-N960U using Tapatalk

[JimLev]

MAF connector is p/n 12 52 1 433 204
Pins are p/n 12 52 0 007 168 these are empty pins that you’ll need to crimp
Pins with 12” of wire attached are p/n 12 52 0 007 170

[BimmrMeUpSnotty]

Anyone know which crimper tool they need?

[philly98540]

I love how you can get BMW connectors and the prices are not horrible. Nice parts system compared to other cars I've owned.