help needed badly

[tatty999]

hi guys newbie here
anyway were to start
ive got these fauld codes A3AF message nominal road speed value 0x200 faulty reciever KOMBI DME DDE
A560 NO message (display,switching note reciever KOMBI, transmitter DME DDE
A562 message(status of auto start stop function 0x308)faualy reciever KOMBI transmitter DME DDE
AN ALSO
D01E message( kilomtre reading/range LDM transmitter KOMBI
ive got brake lights on dash ive cleared stored codes an these come back instantly please help
not a clue wats going on no mechanicaly minded at all
i d id have a frm fault but ive got rid of that by putting a second hand one in ps flauts were there before i changed it n now still there
HELP the car is running by the way but cant pass MOT inspection till brake lights on dash have gone

[154e90]

It sounds like you have CAN issues with the gauge cluster. If you unplug the connector behind the cluster and see acceptable power, ground, and K-line signals you may need a new cluster. I can walk you through testing those if you'd like, but you'd need an oscilloscope.
Do you have ISTA so you can do a gauge cluster sweep test?
Do you have any other gauge cluster issues?