toybro
04-05-2020, 05:27 AM
Hey. I've been tired of it for 2 years. I want to recode the meter to R6. In X16, I connected pins 11 and 12 to the diagnostic lines under the passenger compartment, unfortunately, ncs shows the error IFH-0003, Chasis is Faulty. I recoded ECU for a bodywork vin. It also did nothing. INPA does not connect to the meter, IFH-0009. M52B28 MS41 engine. I don't want to change the meter because of mileage. The car doesn't have EWS, i removed her from ecu
EDIT: Odometer number: VDO 110.008.645
EDIT2: Direct connect txd and rxd to diagnostic port doesnt work. iFH-0006, tested on 2 odometers, motometer and vdo
EDIT: Odometer number: VDO 110.008.645
EDIT2: Direct connect txd and rxd to diagnostic port doesnt work. iFH-0006, tested on 2 odometers, motometer and vdo