Ccc programming abort, HELP

[Emas46]

Hey everyone, tried to update e60 lci ccc with k+dcan cable using winkfp and then disaster happend, cable disconected at 5% of update, and now the problem: Ccc is stuck on bmw logo, ista d shows error in ccc module "programming abort". After that I realised that I need good power source for battery and about 8 hours of update (facepalm) ! Is there any chance to get it back working with my cable? I dont really want to wait 8 hours and risk my ccc, wish could read before doing smth... thanks.

[atomantmk]

And most important is that you need ICOM with connected optic cable to do update on your CCC.
You must to find now someone with ICOM to update and make alive again.

Sent from my SNE-LX1 using Tapatalk

[Emas46]

Thank you.. Well will have to find someone with icom, or maybe theres another way, cuz it was only 5% in update

[Emas46]

What about NFS flash?

[wjgud123]

When you want upgrade module's don't use k-dcan cable, there is almost 99,9% to fail.
Best and only solution is ICOM with MOST and optical cable plus good power source.

Now, find somebody with ICOM and he can re-flash your unit.