nickwlr
08-25-2019, 05:18 PM
2007 BMW E92
After a 10 hour drive a few months ago the engine stalled pulling into my neighborhood (lucky me).
I check the codes and received a code that had something to do with fuel delivery. (I can't remember what it was)
I back probed the connector to the pump while cranking the car and saw voltage so I just assumed the pump had gone bad. I had also checked to see if I had any pressure in the fuel rail and did not.
I bought a new pump from BMW dealership and installed it.
Installed the new pump but I cannot hear it come on when I engage ignition 1 or 2.
I check and have no pressure in the fuel rail.
I do get voltage at the connector to the pump.
I jumped the pump and can hear it come on.
I jumped the pump & cranked the car and still nothing. Not even pressure in the fuel rail.
So lost at this point. What are my option? Is it the module?
Here's two videos attempting to explain my issue.
https://youtu.be/FW22nUTz3BU
https://youtu.be/M-4QBIihC00
After a 10 hour drive a few months ago the engine stalled pulling into my neighborhood (lucky me).
I check the codes and received a code that had something to do with fuel delivery. (I can't remember what it was)
I back probed the connector to the pump while cranking the car and saw voltage so I just assumed the pump had gone bad. I had also checked to see if I had any pressure in the fuel rail and did not.
I bought a new pump from BMW dealership and installed it.
Installed the new pump but I cannot hear it come on when I engage ignition 1 or 2.
I check and have no pressure in the fuel rail.
I do get voltage at the connector to the pump.
I jumped the pump and can hear it come on.
I jumped the pump & cranked the car and still nothing. Not even pressure in the fuel rail.
So lost at this point. What are my option? Is it the module?
Here's two videos attempting to explain my issue.
https://youtu.be/FW22nUTz3BU
https://youtu.be/M-4QBIihC00