bcurrie
08-15-2019, 02:12 PM
So In the winter I had abs sensor go bad. But not knowing which nine I replaced them all. My abs light came on again recently so I figure one is just dirty now, but also my brake pedal feels very spongy. But there was never a chance for air to enter the system. Would it be related to the abs light being on? I tired to activate the abs pump by jumping the 30 and 87 relay pin, but the pump didn’t activate.
- - - Updated - - -
Forgot to mention, when I went to look at my abs sensors, the rear driver side wire must have popped out of the clip and rubbed on the wheel, so I soldiered the wires back together but no help with the error light.
- - - Updated - - -
Forgot to mention, when I went to look at my abs sensors, the rear driver side wire must have popped out of the clip and rubbed on the wheel, so I soldiered the wires back together but no help with the error light.