OBwan
07-24-2019, 01:50 PM
This is for a 2011 Z4 3.0 because there is not much activity on that forum.
I have an Airbag light on the dash. I have hooked up a Foxwell scanner to the system and I get code 93C3, passenger front sensor. I changed the passenger side front sensor under the hood but the code will not reset. On live data it shows the passenger deactivation is on whether anyone is sitting in the passenger seat or not. The Passenger seat remains unassigned and does not change with a passenger in the seat or not. What does change is the deactivation indicator light by the rear view mirror. It goes off when there is a passenger in the seat and comes on when the passenger gets up.
Both seat belt latches are responsive and cycle as they should with the scanner.
Any ideas or am I stuck to take it to the dealer?
I have an Airbag light on the dash. I have hooked up a Foxwell scanner to the system and I get code 93C3, passenger front sensor. I changed the passenger side front sensor under the hood but the code will not reset. On live data it shows the passenger deactivation is on whether anyone is sitting in the passenger seat or not. The Passenger seat remains unassigned and does not change with a passenger in the seat or not. What does change is the deactivation indicator light by the rear view mirror. It goes off when there is a passenger in the seat and comes on when the passenger gets up.
Both seat belt latches are responsive and cycle as they should with the scanner.
Any ideas or am I stuck to take it to the dealer?