Warrengee
05-29-2018, 04:01 PM
http://http://i1064.photobucket.com/albums/u378/warrengrenfell1/Mobile%20Uploads/727F3020-17ED-4208-9991-9BEC090948A3_zpsh6xdf6b3.jpg (http://s1064.photobucket.com/user/warrengrenfell1/media/Mobile%20Uploads/727F3020-17ED-4208-9991-9BEC090948A3_zpsh6xdf6b3.jpg.html)Hello all
this is my first post as I am in a spot of bother.
i took my car in to have the valve stem seals replaced due to smoking and once it was done I got this error code and the engine management light came on only after switching the car off then on again.
It now has weak acceleration and doesn’t idle great.
i swapped the input and output cam sensors and no change.
i took out both vanos solenoids and looking in the holes there is a wire running diagonally in there but to me this doesn’t look right. If I could post pictures on here it would be easier to describe.
does anybody know what I should see when looking in where the solenoid goes?
any suggestions would be appreciated.
this is my first post as I am in a spot of bother.
i took my car in to have the valve stem seals replaced due to smoking and once it was done I got this error code and the engine management light came on only after switching the car off then on again.
It now has weak acceleration and doesn’t idle great.
i swapped the input and output cam sensors and no change.
i took out both vanos solenoids and looking in the holes there is a wire running diagonally in there but to me this doesn’t look right. If I could post pictures on here it would be easier to describe.
does anybody know what I should see when looking in where the solenoid goes?
any suggestions would be appreciated.