46 brake master cylinder on e36

[fikemoo]

Hi guys I thought I remeber reading somewhere that when you do the 330i brake upgrade that you can use the e46 330i master cylinder also instead of an e36 m3 one but can't seem to find any info to support this. Can anybody confirm or deny this

Thanks mike

Sent from my SM-N9005 using Tapatalk

[spyderg0d]

I thought the 330 master was the same as a regular 325 328.. I think it was the pedal had a different fulcrum piont. But I can't be 100%

[fikemoo]

Hi thankyou for your reply. I think after getting some feedback from other forums I will be going for a e36 m3 servo and master cylinder. So I have a quick question in regards to that. I know they fit but I've been told to look out for which one to get as there are fitting/pipe differences

Can anybody expand on this

Thanks mike

Sent from my SM-N9005 using Tapatalk

[spyderg0d]

its probably the fittings on the master for the lines. I'm sure there are flare fitting adapters to put the smaller lines on the e36 onto the larger fittings that probably are on the master.