Engine ID help

[DelrodTN]

My son and I just bought a 1969 BMW 1600-2 and it is our first Bimmer. We were told it has an M10 engine but it is a newer 2.0 liter engine, and not the 1.6 liter. I just wrote the engine ID number down and tried to find it on the internet but haven't had any luck. Everything I read says there are 8 numbers. Any help would be greatly appreciated. Here is the number on the block, right above the starter...
+2361385+

And right above this upside down is 2.0 stamped on the same block flange, so I assume that is the 2.0 liter designation.

[visionaut]

BMW 2002s also carry the car's matching 7-digit VIN on the engine block. Looking up that engine ID on Realoem.com shows it's from a 2002 produced Oct 1974. Coupled with the 2.0 you also see marked there, I'd say you likely have a 2.0 liter engine that was swapped in by a PO.

HTH,
Tom

[DelrodTN]

BMW 2002s also carry the car's matching 7-digit VIN on the engine block. Looking up that engine ID on Realoem.com shows it's from a 2002 produced Oct 1974. Coupled with the 2.0 you also see marked there, I'd say you likely have a 2.0 liter engine that was swapped in by a PO.

HTH,
Tom

Thank you Tom. What is a PO? And I am clearly a newbie. What is HTH?

[rlkrlk]

Previous Owner.

And, Hope This Helps.

Welcome to the internet. :)

Ray

[roundeie]

Based on the BMWClassicos VIN decoder the block came from herehttp://uploads.tapatalk-cdn.com/20160927/ce9f5899e3dd877413ec115a2aecc619.png


Sent from my iPhone using Tapatalk

[ogkush420]

Based on the BMWClassicos VIN decoder the block came from herehttp://uploads.tapatalk-cdn.com/20160927/ce9f5899e3dd877413ec115a2aecc619.png


Sent from my iPhone using Tapatalk

where can i find this decoder? ive been looking for something similar for awhile and all i was able to find was a website that gave a cars production date range based on the vin no other info....

[roundeie]

http://www.bmwclasicos.com/vin.php

Works only for the 2002


Sent from my iPhone using Tapatalk