lorant.bogath
08-29-2016, 06:24 PM
Hello all,
I replaced my rear guibo flex disc on my e90 320d using a Meyle product, put together as it was, all bolts lined up, used thread locker when reassembling, the flex disc is installed in the right direction but it looks warped as the one on the photo. The propshaft seems to be about a mm towards the gearbox opposed to where it sat before(visibly shiny part indicates the propshaft was there)
What could be the reason and is there a way to pull the propshaft towards the rear diff?
http://www.alfabb.com/bb/forums/attachment.php?attachmentid=527905&stc=1&d=1399065505
I replaced my rear guibo flex disc on my e90 320d using a Meyle product, put together as it was, all bolts lined up, used thread locker when reassembling, the flex disc is installed in the right direction but it looks warped as the one on the photo. The propshaft seems to be about a mm towards the gearbox opposed to where it sat before(visibly shiny part indicates the propshaft was there)
What could be the reason and is there a way to pull the propshaft towards the rear diff?
http://www.alfabb.com/bb/forums/attachment.php?attachmentid=527905&stc=1&d=1399065505