E38 Headlight Washer Nozzle Replacement

[tjpike]

Hi guys,

So i had a question, one of the nozzles on my passenger side has fallen off, would I have to replace the whole unit? Or can I just replace that one nozzle?

pic: http://www.ebay.com/itm/GENUINE-BMW-E38-740i-750iL-740il-Black-Single-Headlight-Washer-Spray-Nozzle-/222015472212?hash=item33b1274254:g:RjAAAOSwcBhWVed O&vxp=mtr

Will it just slot into place or what?

Thanks

EDIT: Headlight Washer Nozzle

[AR424]

pretty sure you have to replace the whole thing........it's a pretty easy job, 20-30 minutes tops....

[bimmertrek]

Hi guys,

So i had a question, one of the nozzles on my passenger side has fallen off, would I have to replace the whole unit? Or can I just replace that one nozzle?

pic: http://www.ebay.com/itm/GENUINE-BMW-E38-740i-750iL-740il-Black-Single-Headlight-Washer-Spray-Nozzle-/222015472212?hash=item33b1274254:g:RjAAAOSwcBhWVed O&vxp=mtr

Will it just slot into place or what?

Thanks

EDIT: Headlight Washer Nozzle

Yep, yank the front bumper off and you get to it from inside the bumper. There is a single big plastic nut that holds it on. Pretty easy job just make sure you dont scratch the Fenders removing the bumper.

[TxDarth]

Actually you can just replace the one nozzle, they just pop in place. But where you are going to get one nozzle, another story.

I found this out when I accidently bumped one of mine out - I stuck it back in and it has been doing fine for over two years.

[chris33]

As Darth says, you can pop the nozzle in. They are aim-able.