Climate Control Issue: Drivers on 90, Passenger on 60, unit not responding

[lesguy]

All was working fine, then this morning noticed that the passenger side temp (by itself) was moving down from about it's usual 74, to 60. And nothing I did could change it after that. Drivers side continued to work fine, other functions (fan speed, etc) also all seemed to work fine. Took the climate control unit out and apart, and sprayed light amount of contact cleaner on the circuit board (didnt soak) let it air dry thoroughly, put everything back together, and now the drivers side is stuck on 90, passenger side stuck on 60, and the unit isnt responding to any button pushes.

Is the entire climate control unit gone?

[Flounderasu]

Sounds like you need a new IHKA panel

[lesguy]

Thanks for the suggestion

[lesguy]

If the IHKA panel is the front panel of the climate control unit, then that was the issue. A used one from ebay did the trick. Thanks

[Flounderasu]

If the IHKA panel is the front panel of the climate control unit, then that was the issue. A used one from ebay did the trick. Thanks

Yes sir, it is. Glad I could help!