Bellhousing Bolts Torque

[TJ21]

I'm wondering what the torque specs are for the zf4hp22 bellhousing botls?

Thanks

[south42]

tight. nice and tight


Andy

[Bimmerick]

tight. nice and tight


Andy

Good gauge Andy, I would add: tight but not too tight.

[DrCharles]

Tighten until they strip, then back off half a turn?

[Bimmerick]

I'm wondering what the torque specs are for the zf4hp22 bellhousing botls?

Thanks
TJ,
Looked it up just for you bro. Page 240-6 of the Bentley says "transmission to engine torx bolts":
M8 - 21nm - 15ftlbs
M10 - 42nm - 31ftlbs
M12 - 63nm - 46ftlbs

[TJ21]

TJ,
Looked it up just for you bro. Page 240-6 of the Bentley says "transmission to engine torx bolts":
M8 - 21nm - 15ftlbs
M10 - 42nm - 31ftlbs
M12 - 63nm - 46ftlbs

They aren't teams to engine, but I also need these, thanks

[Bimmerick]

They aren't teams to engine, but I also need these, thanks

Oh sorry bro, I thought you wanted "teams to engine", but I see now you asked for "bellhousing botls"

[tredzz]

bmw torque settings http://tedserbinski.com/files/bmw_torq.pdf

[ross1]

Good n tight. One grunt's worth on the big ones, snug on the rest..

[mboor]

yes, good n tight. too tight is broken.

[TJ21]

They got put on yesterday and are pretty tight.. was hoping for some more specifics but decided it doesn't matter too much