E36 328I toe out question

[Pyropete82]

So I just switched over to the s52 m3 spindle and put the eyeball fcabs on, treehouse racing, and it looks like my caster has visibly changed along with toe out, I am still on my stock 328 control arms
1. How do I eliminate the toe out?
2. Does the m3 control arm solve this?
3. Am I stuck with the result I have?

[MatthewH]

Toe is adjustable at the tie rods ends on both sides.

There is two different Treehouse eyeball designs--probably similar to the offset and center stock bushings.

What are you using for upper strut mounting?

There are several possible combinations of strut mount, control arm, and bushing. If you have stock 328 strut mounts you should have gotten the centered style eyeball mount.

[Pyropete82]

They are centered, I'm running coil overs, pillow ball setup. I think your right,a new alignment well work.

[4ABHGE]

New alignment will fix this. You should get an alignment every time you change a suspension component or even say adjust ride heights on coilovers

[Pyropete82]

Fixed and drives way better on freeway, doesn't sound like I'm driving on loose gravel, the toe was so positive, lol
Thanks!