2009 328i warning lights

[lazayas]

Hi, yesterday when i came home from work the abs, brake and track light shows up for a second then go off, a few minutes the lights comes on again. i brought a c110 scanner on ebay today. but i need some suggestion right here. i got a pic of the problem right here

http://imagizer.imageshack.us/v2/280x200q90/674/LCKAD7.jpg

thanks in advance

[beezul]

Hi, yesterday when i came home from work the abs, brake and track light shows up for a second then go off, a few minutes the lights comes on again. i brought a c110 scanner on ebay today. but i need some suggestion right here. i got a pic of the problem right here thanks in advance

It could be a number of things. Your scanner that you just bought might not pick up all the ABS codes so keep that in mind . When my three lights came on I brought it to the shop. Rear right speed sensor. $265.

-Keith

[lazayas]

It could be a number of things. Your scanner that you just bought might not pick up all the ABS codes so keep that in mind . When my three lights came on I brought it to the shop. Rear right speed sensor. $265.

-Keith

Thanks for your replay. i hope that the scanner told me if i got a sensor fault...

[Snayko]

Just buy cable and use simple software ( like dis) so you can always find the problem, and clear errors and not pay ridiculous price for replacing sensor which cost itself 40$ And labor 15 minutes

[jherrold]

The low tire warning can be reset with out the scanner

[lazayas]

yes i reset the low tire warning. i got the c110 scanne i reset some fault codes on driver menu but i cant enter on chassis option because i always got not communication, when i research on this device said that works on model e90 2006 thru 2011... i dont know if dosent work on my bmw 328i 2009. can someone tell me if i doing something wrong ?

Thanks in advance

[Snayko]

Are you connecting with ignition on?
try with ignition on but With engine off

[lazayas]

Thanks for your replay... yes i try ignition on, ignition off, engine off, engine on. but still got the same error. some dealer told me that in my car i need to connect on dsc/abs the engine must be running. i try that but still dosent connect. some suggestions ?