PDA

View Full Version : Installing power seats - wiring



Golump
07-31-2014, 06:07 AM
Hi,

I have been searching around for guides,DIY and in other forums for information about how to connect power and memory cables for the power seats in my E24 -86 Europe. Currently I have the comfort manual seats installed.

The seller cut of the cables from the car so I have 4 cables I need to connect somewhere in order for it to work properly. All other cables in the cable harness are connected to the seats and the center console switches. At first I thought I would need to pull cables from the battery, the power distribution box and then in to the car interior to connect it with the seats. After checking the electrical diagram it seems that I should connected to the accessory connector (C302) but I am not sure, not even sure if it is wired and prepared all the way to the 302.

Out of the four cables, 1 is power (RED), 1 is ground (BROWN), 1 is BLUE and the last one is GREEN/BLACK. The last two cable just mentioned I have no idea where to plug in?

http://forumbilder.se/DDF8N/image.jpeg (http://forumbilder.se/DDF8N/image)