Just bought a 1997 328i and need some guidance on Camshaft timing

[10Til8]

Long story short, bought a 1997 328i that had a BHG dirt cheap.. Removed the head, Machine shop said it was cracked.. So i have another head being checked out to use. Pending this head is OK, are there any Guides to read or Stickies on Cyl head installation for this engine? Camshaft orientation on Reassembly etc.? I've looked on Youtube which has helped. but I like to print out Guides to have in the shop. Thanks

Darren

[e36fiend]

The pelican parts write-up is a great place to start: http://www.pelicanparts.com/bmw/techarticles/E36-camshaft-timing/E36-camshaft-timing.htm