Power Steering Pump

[74baja]

Hi folks,

It seems that my power steering pump is leaking (1980 633CSi). It's ahrd to find an aftermarket pump online, but this one http://www.summitracing.com/parts/aaz-21-5851?seid=srese1&gclid=CIWF5r6GhL4CFe07OgodCw0Aew looks identical except for the flange on the pulley shaft with the three holes. On my car, the pulley is held on by one central nut. Can this flange be removed, and the pulley be attached directly to the shaft?

Does anyone know if this will fit my 633?

Thanks,
Jack

[loxxrider]

Why don't you just buy a $25 rebuild kit? It is pretty dang easy to rebuild the pump on the bench. You might even try just tightening the bolts on the pump... they were loose on mine and were the cause of my leak (I rebuilt it anyhow).