cragg56
02-16-2014, 07:53 PM
SOLD TO bimmer571
I purchased this unit second hand, but never got a chance to use it before I scrapped my project. The majority of the parts are used, but in good condition and then I replaced some of the parts with new ones. I made sure to note which items are new, otherwise everything else listed is new.
Below is a list of everything that will be included
AIM MXL Pista Dash and Wiring Harness
AIM MXL Pista
AiM LCU-One Lambda Controller With CAN Connection (MC-219) (It's an older model, but functions just fine and includes a brand new Bosch LSU 4.9 oxygen sensor)
AiM GPS Module (This is the older model, but functions just fine)
AiM 4-Port CAN Data Hub (MC-329)
Omni Power 4 Bar Map Sensor w/ Wiring Pigtail Adapter For Use with AIM MXL
PLX Devices EGT (SM-EGT)
AiM VDO 0-72 psi (5 bar) Pressure Sensor with Cable (MC-323) (Has a dent in the housing, but functioned fine)
Two AiM VDO 0-150 psi (10 Bar) Oil Pressure Sensors w/ Cables (MC-320) (Brand New and have never seen any liquid, but have been mounted)
Two AiM Magnetic Wheel Speed Sensor, 719 Lead (MC-216), but are missing the magnetic pickup (These are just being included free since I have no need for them)
Three MyChron 719-719 Automotive Patch Cable, 1.5M (4.9 ft) (MC-211-1.5M)
Four MyChron 719-719 Automotive Patch Cable, 2M (6.56 ft) (MC-211-2M)
Two MyChron K-Type to K-Type Thermocouple Patch Cable (MC-203)
Two MyChron Automotive Oil/Coolant Temperature Sensor, 1/8 NPT (MC-201-1/8) (Brand New and have never seen any liquid, but have been mounted)
Brand New Iron Canyon Motorsports Fuel Sender for E36/46 w/ 719 Binder Connector for AIM MXL (This converts your stock fuel level sender into a signal the AIM MXL unit can use)
Retail on the above items is in excess of $3500
Asking $2350 shipped OBO
http://i53.photobucket.com/albums/g45/crcragg/Turbo%20Part%20Out/DSC01890_zps7a06cde8.jpg (http://s53.photobucket.com/user/crcragg/media/Turbo%20Part%20Out/DSC01890_zps7a06cde8.jpg.html)
http://i53.photobucket.com/albums/g45/crcragg/Turbo%20Part%20Out/DSC01893_zps5e6c584c.jpg (http://s53.photobucket.com/user/crcragg/media/Turbo%20Part%20Out/DSC01893_zps5e6c584c.jpg.html)
http://i53.photobucket.com/albums/g45/crcragg/Turbo%20Part%20Out/DSC01891_zps9d12abda.jpg (http://s53.photobucket.com/user/crcragg/media/Turbo%20Part%20Out/DSC01891_zps9d12abda.jpg.html)
http://i53.photobucket.com/albums/g45/crcragg/Turbo%20Part%20Out/DSC01894_zps1cc53d85.jpg (http://s53.photobucket.com/user/crcragg/media/Turbo%20Part%20Out/DSC01894_zps1cc53d85.jpg.html)
http://i53.photobucket.com/albums/g45/crcragg/Turbo%20Part%20Out/DSC01892_zps86e7441c.jpg (http://s53.photobucket.com/user/crcragg/media/Turbo%20Part%20Out/DSC01892_zps86e7441c.jpg.html)
I purchased this unit second hand, but never got a chance to use it before I scrapped my project. The majority of the parts are used, but in good condition and then I replaced some of the parts with new ones. I made sure to note which items are new, otherwise everything else listed is new.
Below is a list of everything that will be included
AIM MXL Pista Dash and Wiring Harness
AIM MXL Pista
AiM LCU-One Lambda Controller With CAN Connection (MC-219) (It's an older model, but functions just fine and includes a brand new Bosch LSU 4.9 oxygen sensor)
AiM GPS Module (This is the older model, but functions just fine)
AiM 4-Port CAN Data Hub (MC-329)
Omni Power 4 Bar Map Sensor w/ Wiring Pigtail Adapter For Use with AIM MXL
PLX Devices EGT (SM-EGT)
AiM VDO 0-72 psi (5 bar) Pressure Sensor with Cable (MC-323) (Has a dent in the housing, but functioned fine)
Two AiM VDO 0-150 psi (10 Bar) Oil Pressure Sensors w/ Cables (MC-320) (Brand New and have never seen any liquid, but have been mounted)
Two AiM Magnetic Wheel Speed Sensor, 719 Lead (MC-216), but are missing the magnetic pickup (These are just being included free since I have no need for them)
Three MyChron 719-719 Automotive Patch Cable, 1.5M (4.9 ft) (MC-211-1.5M)
Four MyChron 719-719 Automotive Patch Cable, 2M (6.56 ft) (MC-211-2M)
Two MyChron K-Type to K-Type Thermocouple Patch Cable (MC-203)
Two MyChron Automotive Oil/Coolant Temperature Sensor, 1/8 NPT (MC-201-1/8) (Brand New and have never seen any liquid, but have been mounted)
Brand New Iron Canyon Motorsports Fuel Sender for E36/46 w/ 719 Binder Connector for AIM MXL (This converts your stock fuel level sender into a signal the AIM MXL unit can use)
Retail on the above items is in excess of $3500
Asking $2350 shipped OBO
http://i53.photobucket.com/albums/g45/crcragg/Turbo%20Part%20Out/DSC01890_zps7a06cde8.jpg (http://s53.photobucket.com/user/crcragg/media/Turbo%20Part%20Out/DSC01890_zps7a06cde8.jpg.html)
http://i53.photobucket.com/albums/g45/crcragg/Turbo%20Part%20Out/DSC01893_zps5e6c584c.jpg (http://s53.photobucket.com/user/crcragg/media/Turbo%20Part%20Out/DSC01893_zps5e6c584c.jpg.html)
http://i53.photobucket.com/albums/g45/crcragg/Turbo%20Part%20Out/DSC01891_zps9d12abda.jpg (http://s53.photobucket.com/user/crcragg/media/Turbo%20Part%20Out/DSC01891_zps9d12abda.jpg.html)
http://i53.photobucket.com/albums/g45/crcragg/Turbo%20Part%20Out/DSC01894_zps1cc53d85.jpg (http://s53.photobucket.com/user/crcragg/media/Turbo%20Part%20Out/DSC01894_zps1cc53d85.jpg.html)
http://i53.photobucket.com/albums/g45/crcragg/Turbo%20Part%20Out/DSC01892_zps86e7441c.jpg (http://s53.photobucket.com/user/crcragg/media/Turbo%20Part%20Out/DSC01892_zps86e7441c.jpg.html)