PDA

View Full Version : 2007 E60 BMW 5 Series fuel filter DYI



em3drmz
01-28-2014, 01:29 PM
Hello y'all. I couldn't find any video diy's for my particular model so I decided to make this very quick example. If you have any questions please ask on my youtube page for quicker replies.

http://www.youtube.com/watch?v=t-rf8eOaOfc

pcy
01-29-2014, 08:13 PM
Good DIY procedure.

When I replaced the fuel filter, I also used screw driver and hammer. As I was hitting the collar ring, the filter itself was turning. So, I had to get a helping hand to use another screw driver to hold the filter in place while I was trying to undo the collar ring. Other than that, it was a relatively simple job. I don't remember if you stated in the video, it'd be good to have as little gas as possible in the tank.

528canyonrot
01-29-2014, 09:32 PM
How much was the pump?

pcy
01-30-2014, 10:32 AM
OP replaced the fuel FILTER.
Fuel filter is on the drivers side of the tank and the fuel pump is on the passenger side of the tank. Fuel filter is around $150 and the pump is around $200.

528canyonrot
01-30-2014, 10:47 AM
OP replaced the fuel FILTER.
Fuel filter is on the drivers side of the tank and the fuel pump is on the passenger side of the tank. Fuel filter is around $150 and the pump is around $200.Thank you, for some reason I thought they were made together on the e60

itb76
04-02-2016, 03:41 PM
Great video, nice and concise! Hit all the important points without wasting time showing how all four screws come out, etc.