///Sleeper
11-03-2013, 10:53 PM
http://denver.craigslist.org/cto/4144841923.htm (http://denver.craigslist.org/cto/4144841923.html)l
Hi guys, the time has come to sell my E36 M3 after ten years of ownership as quite frankly, I hardly drive it anymore and I need to free up the capital and the space in my garage. See the craigslist ad above for pictures. I am asking $8,500 in the Craigslist ad and I will entertain ballpark offers. The car has 143xxx miles, of which my ownership accounts for 50k or so. I am located in Denver, but will drive a reasonable distance to meet serious buyers. (Related to my sig pic, the car no longer has the splitters and I have replaced the depo headlights with the frenched high beams with Bosch headlights)
Details:
Suspension
- Ground Control "track/school" coilovers (single adjustable koni, 550/625 spring rates)
- Ground Control hybrid camber plates
- BMW front shock tower reinforcements
- Ground Control RSMs
- Powerflex RTABs and FCABs
- SPC adjustable rear lower control arms
- BMW crossbrace
- UUC transmission mounts and reinforcements
Engine:
- 24# injectors
- cold air intake with AFE pro dry s cone filter
- Bosch 3.5" HFM (using a bimmerworld silicon 3.5" - 3" reducer elbow)
- Turner chip
- Dr. Vanos stage 1
- Recently installed new idler tensioner pully and belt, power steering resevoir and resevoir to pump hose (the cooling hose and return hose should be replaced as they are seeping)
Brakes (very little wear):
- BMW motorsport floating rotors (front); OE (rear)
- Axxis ultimate pads; ATE super-blue fluid
Interior (NO BACK SEATS, and I DONT have the originals to put back in):
- Recaro Pole Position driver/passenger seats (Black velour in 10/10 condition)
- Recaro black steel side mounts
- Recaro sliders
- VAC aluminum floor mounts
- NOTE: stock 3-point belts are functional...I installed E36 belt recepticles from the middle, back seat so they fit through the lap belt holes of the front seats allowing the belts stay low accross the lap rather than coming up over the seat bolster
Misc:
- Bosch projector headlights with OSRAM nightbreaker bulbs
As for the bad, cosmetically the paint on the front bumper has road rash and there is some clear-coat failure on the rain gutters and on the top of the rear bumper. The hood and driver door were keyed, but it isn't aweful (I can/will send pics upon request).
Let me know if there's questions...I'd like to free up my garage prior to the snow flying in CO!
Thanks,
Mike
Hi guys, the time has come to sell my E36 M3 after ten years of ownership as quite frankly, I hardly drive it anymore and I need to free up the capital and the space in my garage. See the craigslist ad above for pictures. I am asking $8,500 in the Craigslist ad and I will entertain ballpark offers. The car has 143xxx miles, of which my ownership accounts for 50k or so. I am located in Denver, but will drive a reasonable distance to meet serious buyers. (Related to my sig pic, the car no longer has the splitters and I have replaced the depo headlights with the frenched high beams with Bosch headlights)
Details:
Suspension
- Ground Control "track/school" coilovers (single adjustable koni, 550/625 spring rates)
- Ground Control hybrid camber plates
- BMW front shock tower reinforcements
- Ground Control RSMs
- Powerflex RTABs and FCABs
- SPC adjustable rear lower control arms
- BMW crossbrace
- UUC transmission mounts and reinforcements
Engine:
- 24# injectors
- cold air intake with AFE pro dry s cone filter
- Bosch 3.5" HFM (using a bimmerworld silicon 3.5" - 3" reducer elbow)
- Turner chip
- Dr. Vanos stage 1
- Recently installed new idler tensioner pully and belt, power steering resevoir and resevoir to pump hose (the cooling hose and return hose should be replaced as they are seeping)
Brakes (very little wear):
- BMW motorsport floating rotors (front); OE (rear)
- Axxis ultimate pads; ATE super-blue fluid
Interior (NO BACK SEATS, and I DONT have the originals to put back in):
- Recaro Pole Position driver/passenger seats (Black velour in 10/10 condition)
- Recaro black steel side mounts
- Recaro sliders
- VAC aluminum floor mounts
- NOTE: stock 3-point belts are functional...I installed E36 belt recepticles from the middle, back seat so they fit through the lap belt holes of the front seats allowing the belts stay low accross the lap rather than coming up over the seat bolster
Misc:
- Bosch projector headlights with OSRAM nightbreaker bulbs
As for the bad, cosmetically the paint on the front bumper has road rash and there is some clear-coat failure on the rain gutters and on the top of the rear bumper. The hood and driver door were keyed, but it isn't aweful (I can/will send pics upon request).
Let me know if there's questions...I'd like to free up my garage prior to the snow flying in CO!
Thanks,
Mike