PDA

View Full Version : Climate head doesnt turn on???



sigtwenty
06-11-2013, 11:47 PM
wth climate head wont kick on...what fuse is it? does it even have a fuse? reading the labels im not seeing it

Mayorchuck
06-12-2013, 12:13 AM
Been doing alot of research on this subject overall. I think Fuse 20 may power the IHKA control module. I noticed Fuse 11 feeds the compressor. Believe Fuse 7 is the other one associated with the a/c. No lights at all?

sigtwenty
06-12-2013, 12:18 AM
no lights at all..but if fuse 20 is it, then that explains it. i have the new electric fan hooked up to fuse 20 as a switched circuit. ill check that fuse tomorrow then.

that would make sense, as i never saw my aux fan kick in at all when bleeding the system

http://www.bmw7resource.co.uk/forum/index.php?topic=1689.0

lots of ihka related things running off 20. ill check my connections.

sigtwenty
06-12-2013, 12:42 PM
figured out it was the harness i bought, required a fuse installed for the external device. i had the fuse in the external wire slot thats why climate didnt work
i switched it, and climate work but fan didnt. added a fuse, both work now. so fuse 20 IS an ihka head fuse for those that may need to know this

Mayorchuck
06-13-2013, 12:14 AM
Thanks for the follow up. Even though the WDS indicates it is, can't be hands on to confirm. Glad you go it going.

sigtwenty
06-13-2013, 01:06 AM
Thanks for the follow up. Even though the WDS indicates it is, can't be hands on to confirm. Glad you go it going.

No problem. I switched the adapter to radio fuse and had the precise same issue which told me it was my part. But all ok now and for sure found out about 20.