puttitat
04-19-2013, 04:25 PM
Hi,
Just bought an ADS interface from benemorious. Sweet piece of hardware!
My DME has been tuned with a turner motorsport chip.
The car goes into limp mode aften being pushed a bit, that's why I bought the interface.
INPA reports 1890 rpm. At all times. Even when the engine is stopped, with ignition on. At idle. At 5000 rpm. Could the tuning be done wrong?
The car has been dynoed, 271 bhp at just 4800 rpm, but above that, the Lambda figures are off the scale = runs waaaay to rich, limiting the power output.
Also, I get a 210 Can Getriebebotschaft error @ 640 rpm / 1.80 ms - what does this mean? I've asked Google but with no apparent luck :-(
The car is a dec 94 540i/6 Touring. :-)
Just bought an ADS interface from benemorious. Sweet piece of hardware!
My DME has been tuned with a turner motorsport chip.
The car goes into limp mode aften being pushed a bit, that's why I bought the interface.
INPA reports 1890 rpm. At all times. Even when the engine is stopped, with ignition on. At idle. At 5000 rpm. Could the tuning be done wrong?
The car has been dynoed, 271 bhp at just 4800 rpm, but above that, the Lambda figures are off the scale = runs waaaay to rich, limiting the power output.
Also, I get a 210 Can Getriebebotschaft error @ 640 rpm / 1.80 ms - what does this mean? I've asked Google but with no apparent luck :-(
The car is a dec 94 540i/6 Touring. :-)