Help with error message.

[Joylove]

Hi there

I've got an error message when trying to read my ZCS/FA from the KMB. The message is

Central Coding Key is Faulty

COAPI-1081: faulty GM-key (C1)

FFFFFFFF

The setup has been working fine for many weeks, reading and coding modules. I was attempting to code my CVM (vert module) which threw a fault. I get the error messasge reading the KMB. I do not get the message reading the EWS. I restored the CVM to it's original state using the EWS read and I still have the warning. /car is an R52.

Any help please?

[IcemanBHE]

What version of programs? And what EDIABAS?

[Joylove]

Thanks very much for replying and for any info or remedy you can share.

NCS Is at V3.1.0 [COAPI 3.5.1 b]
EDIABAS is at V6.4.3
SPDaten are at V48.1

I have this combination of EDIBAS and NCS becuase the CD that came with my D+KCan had me install software in a sequence that gave me this particular setup.

[Joylove]

Here are some pictures.


Step one load Expertmode.
http://i88.photobucket.com/albums/k190/coldpost_/Mini/Coding/1.png


Step two select Chassis R50.
http://i88.photobucket.com/albums/k190/coldpost_/Mini/Coding/2.png


Step 3 Select Kombi
http://i88.photobucket.com/albums/k190/coldpost_/Mini/Coding/3.png (http://s88.photobucket.com/user/coldpost_/media/Mini/Coding/3.png.html)


Step 4 receive error message
http://i88.photobucket.com/albums/k190/coldpost_/Mini/Coding/4.png (http://s88.photobucket.com/user/coldpost_/media/Mini/Coding/4.png.html)


Step 5 Try EWS
http://i88.photobucket.com/albums/k190/coldpost_/Mini/Coding/5.png (http://s88.photobucket.com/user/coldpost_/media/Mini/Coding/5.png.html)


Step 6 no error message.
http://i88.photobucket.com/albums/k190/coldpost_/Mini/Coding/6.png (http://s88.photobucket.com/user/coldpost_/media/Mini/Coding/6.png.html)