WTB used set of Hawk HT-10s for E36 M3 - REAR axle

[Patriot17]

WTB a used (or new if priced right) set of Hawk HT-10 track pads (PN HB227S.630) for the rear axle on my 98 E36 M3. Maybe someone has a set in the shop or on the shelf that has some decent life left on them?

Thanks and I am looking forward to hearing from you.

[milovanov]

I have a hawk set from 95 e36 m3.
I do not know exact model though. Took them off cuz car was never tracked.
I would say about 80% left of life.
Let me know if you are interested.
I will look t the numbers on the pads if you are interested.

Sent from my DROID3 using Tapatalk 2

[Patriot17]

I have a hawk set from 95 e36 m3.
I do not know exact model though. Took them off cuz car was never tracked.
I would say about 80% left of life.
Let me know if you are interested.
I will look t the numbers on the pads if you are interested.

Sent from my DROID3 using Tapatalk 2

Yes, I am interested, 95-99 use same pads. Could you see what pads you have, check the numbers please? Thank you.

[milovanov]

I guess not hp10.

And about 50% left...

Let me know if still interested.http://img.tapatalk.com/d/13/04/07/eve9y4er.jpg

Sent from my DROID3 using Tapatalk 2

[hc1001]

Hi,

I have a used set of rear HT-10s i no longer need. I upgraded to a rear BBK and these have been sitting in the attic. they have around 5-6mm of pad material left. I removed the metal clips that hold them into the caliper pistons(was using titanium backing plates).

$75 shipped for them if you are interested. Thanks.

http://i154.photobucket.com/albums/s264/hc1001/rearpads2_zps89072246.jpg
http://i154.photobucket.com/albums/s264/hc1001/rearpads_zps5fe6b0a9.jpg

[Patriot17]

Hi,

I have a used set of rear HT-10s i no longer need. I upgraded to a rear BBK and these have been sitting in the attic. they have around 5-6mm of pad material left. I removed the metal clips that hold them into the caliper pistons(was using titanium backing plates).

$75 shipped for them if you are interested. Thanks.



Can you verify that they are HT-10s from an E36 M3, please? Thanks.

[Patriot17]

I guess not hp10.

And about 50% left...

Let me know if still interested.

Sent from my DROID3 using Tapatalk 2

I appreciate you replying but I need HT-10s to match the fronts. Thank you for replying.

[hc1001]

Yes, they were on my 98 M3 for HPDEs.
Here is a pic of the original box. Part # matches rear ht-10 pad for E36 M3.
http://i154.photobucket.com/albums/s264/hc1001/rearpads3_zps926e1f46.jpg

[Patriot17]

Found a set and purchased them. Thank you hc1001!

[TeeRific]

Hc1001 do you still have the pads

[ednx]

bump

[hc1001]

Hc1001 do you still have the pads

Sorry already sold to op.